Download CD-DVD Duplicator

Duplicate Controller Functions
Press ENT. All data on the hard drive will be lost after the format and you are asked to confirm
again. The default is No. Press ▼ to select Yes.
After the hard drive is formatted correctly, LCD will show the message as Format HDD ok!. Press
ENT to verify HDD or press ▼ and choose No to finish Format HDD.
How do I choose HD partition type?
In DVD a partition occupies 5GB, in CD 1GB, in DL 10GB and in Auto 1GB. When hard drive
is partitioned as F_S, DVD, CD or DL, you are not allowed to load images larger than the
partition size. (Ex: If you choose to partition as DVD, you are only allowed to load DVD and
CD images but not DL.) When hard drive is partitioned as Auto, controller will automatically
occupy partitions for your image type. (Ex: If you choose to partition as Auto, controller will
occupy 1 partition and 5 partitions when CD and DVD images are loaded
respectivelly.)Therefore, Auto is the most efficient way to load images of different type.
Partition Type Partition Size Images to load
2.9.10 LoadImage Method
Now press ENT and ▼, and you will enter the following figure. This function is to change the way
to save Image. There are 2 formats for choice: Auto and Manual.
9-10. Image P:A
LoadImage Method
The default is Auto.
Press ENT, and use ▲ ▼ to confirm Auto or Manual.
Then press ENT to save.
2.10 Edit Track (for CD only) (ARS-2039A do not have this function)
Function 10 Edit Track is exclusively designed for editing a collection of favorite songs from CDs.
In other words, it can collect different tracks (songs) on a number of CDs and merge them into a
single CD. This function includes 4 subfunctions: CD to CD, CD to HDD, Play Audio Track and
Close Session. Refer to page 12 for the menu.
Select function 10.
10. Edit Track
2.10.1 CD to CD Edit
Now press ENT, and you will enter the following figure.Here the function CD to CD Edit lets you
select a track or more from CD-ROM, and then copy into blank CD-R/RWs.
10-01. Edit Track
CD to CD Edit
19