Download Preceptor 601 - Ergo Computing

Underside
Refer to the diagram below to identify the components on the underside of the
laptop PC:
Module drive eject
Battery eject
Battery pack
WARNING! The underside of the laptop can get very hot. Be careful
when handling it while it is in operation or has recently been in
operation. High temperatures are normal during charging or
operation. TO AVOID INJURY FROM THE HEAT, DO NOT PUT THE
DEVICE ON THE LAP OR OTHER PARTS OF THE BODY.
Battery eject
The battery is held by a double lock arrangement. The smaller sliding latch
frees the spring-loaded latch which, when slid towards the unlocked symbol
partially eject the battery pack. The battery pack is automatically locked in
place when inserted. Usage details are described in the battery section later in
this manual.
Battery pack
The battery pack is combined with the laptop's under-surface in order to reduce
thickness. When the battery is released, the surface and battery pack will be
seen as a single unit. The battery pack cannot be further disassembled and
must be replaced as a single unit.
Ergo Preceptor 601
8