Download Display - Service, Support

Preface
Purpose of this
manual
This manual provides information on hardware components you can use to
interconnect an existing TELEPERM M I/O installation and the process control system SIMATIC PCS 7.
A combination of corresponding tools and programs enables communication
(Configuration and Operation) with the C&O system WinCC.
The information in this manual enables you to:
• commission the TPM 478-2 interface module
• operate migration rack II with PCS7/TM.
Manual
content
This documentation describes system-specific functions of the TPM 478-2
interface module and the use of migration rack II with PCS7/TM.
Topics included:
• Hardware assembly
• Software installation
• Commissioning
• Configuration
• TPM 478-2 interface module
• Migration rack II
• Technical data, abbreviations list, literatur listing, glossary.
Readers
The target group of readers is occupied in programming and process technology engineering.
Prerequisites
Prerequisite is basic knowledge on handling PCs and
working with WinCC/TM.
Also required is knowledge of the process control system TELEPERM M,
PCS7 and SIMATIC S7.
A number of technical descriptions and manuals are available for consolidation of this information. Please refer to the literature index in Appendix C.
Connecting TM I/O to PCS 7
C79000-G8076-C710-04
iii