Download User`s Manual

Caddy
2. UNPACKING AND ASSEMBLY
The Caddy can be delivered by your dealer fully pre-assembled, but it is
also possible that the product comes to you in parts in the box it was
packed in at the factory.
The Caddy was designed to be assembled and disassembled by the
user. Assembling the scooter is very easy and it is good to know the
procedure in case you want to disassemble the scooter for instance if
you want to take it with you in the back of a car.
2.1 Unpacking the box
The Caddy will normally be delivered to you in a large carton box,
please check if the box is not badly damaged. If this is the case you may
want to refuse the delivery. If there is damage to the box always report it
to the person delivering it and make sure the damage is noted on the
shipping documents you sign before accepting the delivery.





a.
b.
c.
d.
e.
f.
g.
h.
Place the box on the floor the right way up (the top is marked
UP).
Carefully cut the tape closing the box, make sure you don´t cut
the contents of the box.
Open lid and remove all the parts from the box, mind your back
lifting some of the heavier parts out of the box.
Put all parts on the floor and put the empty box away, you
should find the following parts (see figure 1):
The frame
The tiller
The rear basket
Two batteries
Two rear wheels
A battery charger
This manual
Two armrest .
17