Download VX-MD3024 User Manual

Chapter 4 Administrating System
result file would not transfer to the FTP server.
For input-file, specify the file name of the input file
including command list to execute every interval
time.
For hour and minute, specify the interval to execute
the commands listed in the input-file.
For output-file, specify the output file name
including the results displayed by executed
command. If the output-file is not specified, the
system automatically generate an output-file of
which the name is IP address + input file name +
the execution time. The IP address of the
generated output file name is the IP address of the
vlan of which vlan ID is lowest on the system.
You can send the output file to the specified FTP
server after finishing the execution of the command
list in the input file automatically.
For no-output, specify this keyword instead of the
output file name to make no output file.
For ip-address, specify the IP address of a FTP
server.
For user-id, specify an user-id that will be used for
downloading in the FTP server.
For password, specify the password of the user in
the FTP server.
For path, specify the directory name in which the
output file is stored.
You can also configure the commands specified in the input file to be executed directly. To configure
the commands specified in the input file to be executed immediately, use the following Privileged
EXEC commands.
Command
Description
autocmd input-file [output-file | terminal | no-
Execute the commands specified in the input file
output]
immediately.
For input-file, specify the file name of the input file
including commands list to execute.
Versa Technology, Inc.
VX-MD3024 Configuration Guide
4-49