Download crealco . - Eurostyle

.crealco
CASEMENT 30.5
CASEMENT 30.5
WINDOW SYSTEM
PRODUCT MANUAL
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
Revision: November 2012
.crealco
CASEMENT 30.5
Index
Legal Disclaimer
Profile Identification
Hardware Identification
Butterfly Gasket and Wedge Codes
Sash Limitation Charts
Standard Top Hung 600Pa Windload
Standard Top Hung 1000Pa Windload
Standard Top Hung 1500Pa Windload
Standard Side Hung 600Pa Windload
Standard Side Hung 1000Pa Windload
Standard Side Hung 1500Pa Windload
Standard Top Hung Window Typical Configurations
Standard Side Hung Window Typical Configurations
Cottage Pane Window Fixed Panel Typical Configurations
Cottage Pane Window Top & Side Hung Typical Configurations
Fixing Details
Typical Cross Sectional Detail Double Top Hung Over Fixed
Typical Cross Sectional Detail Side Hung Over Fixed
Cottage Pane Typical Cross Sectional Detail 2 x 2 Top Hung Over
2x1 Fixed Panel
Lite Window Typical Cross Sectional Detail Side Hung Over Fixed
Outer Frame Component Assembly Detail
Sash Frame Component Assembly Detail
Equal Leg Outer Frame Sill Level & Machining Detail
Unequal Leg Outer Frame Sill Level & Machining Detail
54mm Outer Frame Sill Level & Machining Detail
70mm Outer Frame Sill Level & Machining Detail
Lite Equal Leg Outer Frame Sill Level & Machining Detail
Standard Mullion Machining Detail For End Milling On Equal Leg
Outer Frame
Standard Mullion Machining Detail For End Milling On Unequal Leg
Outer Frame
Standard Mullion Machining Detail For End Milling On 54mm Outer
Frame
Standard Mullion Machining Detail For End Milling On 70mm Outer
Frame
5
6-8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,
BEE Certificates and the Performance Certificates for the relevant system. The manual must also be
used in conjunction with the design and cutting list from the latest version of StarFront.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 2
.crealco
CASEMENT 30.5
Index
Standard Mullion Machining Detail For End Milling On Lite Equal Leg
Outer Frame
Standard Transom With W/B Machining Detail For End Milling On
Equal Leg Outer Frame
Standard Transom With W/B Machining Detail For End Milling On
Unequal Leg Outer Frame
Standard Transom With W/B Machining Detail For End Milling On
54mm Outer Frame
Standard Transom With W/B Machining For End Milling On 70mm
Outer Frame
Standard Transom With W/B Machining Detail For End Milling On Lite
Equal Leg Outer Frame
54mm Mullion Machining Detail For End Milling On Equal Leg Outer
Frame
54mm Mullion Machining Detail For End Milling On Unequal Leg
Outer Frame
54mm Mullion Machining Detail For End Milling On 54mm Outer
Frame
54mm Mullion Machining Detail For End Milling On 70mm Outer
Frame
54mm Mullion Machining Detail For End Milling On Lite Equal Leg
Outer Frame
70mm Mullion Machining Detail For End Milling On Equal Leg Outer
Frame
70mm Mullion Machining Detail For End Milling On Unequal Leg
Outer Frame
70mm Mullion Machining Detail For End Milling On 54mm Outer
Frame
70mm Mullion Machining Detail For End Milling On 70mm Outer
Frame
70mm Mullion Machining Detail For End Milling On Lite Equal Leg
Outer Frame
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,
BEE Certificates and the Performance Certificates for the relevant system. The manual must also be
used in conjunction with the design and cutting list from the latest version of StarFront.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 3
.crealco
CASEMENT 30.5
Index
Cottage Pane Mullion Machining Detail For End milling On Equal Leg
Outer Frame
Cottage Pane Mullion Machining Detail For End Milling On Unequal
Leg Outer Frame
Cottage Pane Mullion Machining Detail For End Milling On 54mm
Outer Frame
Cottage Pane Mullion Machining Detail For End Milling On 70mm
Outer Frame
Cottage Pane Mullion Machining Detail For End Milling On Lite Equal
Leg Outer Frame
Lite Mullion Machining Detail For End Milling On Equal Leg Outer
Frame
Lite Mullion Machining Detail For End Milling On Unequal Leg Outer
Frame
Lite Mullion Machining Detail For End Milling On 54mm Outer Frame
Lite Mullion Machining Detail For End Milling On 70mm Outer Frame
Lite Mullion Machining Detail For End Milling On Lite Equal Leg Outer
Frame
Corner Cleat Assembly Detail For Tubular Sash
Corner Cleat Assembly Detail For Lite Tubular Sash
Glazing Bar Frame Joint Assembly Detail
Cross Joint Assembly Detail Standard Mullion
Cross Joint Assembly Detail Lite Mullion
Cross Joint Assembly Detail Cottage Pane Mullion
Glazing Procedure
Friction Assembly Detail
Handle Assembly Detail
Fixing Lug Preparation Detail
54
55
56
57
58
59
60
61
62
63
64
65
66-67
68
69
70
71-72
73
74
75
This manual must be read in conjunction with the Installation, Cleaning and Maintenance Document,
BEE Certificates and the Performance Certificates for the relevant system. The manual must also be
used in conjunction with the design and cutting list from the latest version of StarFront.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 4
.crealco
CASEMENT 30.5
LEGAL DISCLAIMER
All information, recommendations or advice contained in this documentation
is given in good faith to the best of Wispeco’s knowledge and is based on
current procedures in effect.
Since the actual use of this documentation by the user is beyond the control of
Wispeco, such use is within the exclusive responsibility of the user. Wispeco
cannot be held responsible for any loss incurred through incorrect or faulty use
of this documentation.
Great care has been taken to ensure that the information provided is correct.
Wispeco will accept no responsibility for any errors and/or omissions, which may
have inadvertently occurred.
All mechanical joints must be sealed with a Wispeco approved joint sealer.
Laminated glass must not stand in water.
All drawings in the Wispeco Documentation are shown NOT to scale.
Wispeco cannot accept responsibility for the use of standard products since
Wispeco does not know where these products are being installed.
The use of anti-magnetic stainless steel screws and pop rivets is recommended
to reduce galvanic corrosion in harsh environments.
The hardware recommended in this documentation is suitable for use in most
atmospheric environments. When hardware is used in severe costal environments
the manufacturer of the hardware must be consulted.
Fixing lugs on frames must be positioned as per the user manual and used in
accordance to the AAAMSA specifications. When profiles are screwed together
the screw centers must also be according to the user manual.
All glass used within Wispeco products must comply with SAGGA regulations.
By continuing to use this documentation you acknowledge that you
understand and accept the legal disclaimer.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 5
CASEMENT 30.5
WINDOW SYSTEM
PROFILE IDENTIFICATION
30.50
FRAME 30mm
EQ LEG STD
W27990
30.50
FRAME 30mm
EQ LEG ECON
W55009
Est. 1946
Aluminium Profile Stockists
30.50
30.50
FRAME 30mm
UNEQ LEG STD
W27992
SASH TUBULAR
STANDARD
W53631
30.50
SASH
ECONO
W50959
70.00
FRAME 70mm
W70968
28.20
54.38
32.00
SASH
PICTURE FRAME
W55441
BEAD
4 & 5mm
W27991
FRAME 54mm
W28481
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 6
.crealco
CASEMENT 30.5
WINDOW SYSTEM
PROFILE IDENTIFICATION
Est. 1946
Aluminium Profile Stockists
30.50
30.50
CAS30.5 FRAME 30mm
EQUAL LEG
W32028
30.50
CAS30.5 FRAME 30mm
UNEQUAL LEG
W32027
CAS30.5 SASH TUBULAR
W55684
28.30
CAS30.5 BEAD MULTI
13mm GAP
W31139
30.50
CAS30.5 MULLION 30mm
W55685
30.50
CAS30.5 MULLION 30mm
ECONO
W55008
27.77
61.75
CAS30.5 BEAD 6mm
W28325
CAS30.5 FIXING LUG
TWIST IN
W28002
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 7
.crealco
CASEMENT 30.5
WINDOW SYSTEM
PROFILE IDENTIFICATION
Est. 1946
Aluminium Profile Stockists
30.50
30.50
CAS30.5 MULLION 30mm
STANDARD
W53629
CAS30.5 MULLION 30mm
WEATHER BAR
W53630
70.00
54.00
CAS30.5 MULLION 70mm
W54652
CAS30.5 MULLION 54mm
W54651
30.50
40.00
CAS30.5 CORNER CLEAT
40mm
W27989
CAS30.5 MULLION 30mm
COTTAGE PANE
W54867
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 8
.crealco
CASEMENT 30.5
WINDOW SYSTEM
HARDWARE IDENTIFICATION
8x9 C/S
HANDLE SCREW
BLUNT POINT
STPPS895
CASEMENT 30.5
GLAZING BAR
PACKER (BLACK)
MP305
FRICTION STAY
FS304BFG
Est. 1946
Aluminium Profile Stockists
8x30 P/HEAD POSI
S/S SCREW
STPPS830
8x40 COUNTERSUNK
POSI S/S SCREWS
STCPS840
*
MULTI FIXING LUG ALUM 15mm
FIX29499
30.5 CROSS
CONNECTOR (BLACK)
CC305
EUROLINE PT
HANDLE
RIGHT/ LEFT
HND004RHB
HND004LHB
6.00
7.00
4.8 x 10
DOME RIVET
CSKR4810
30.5 CASELITE
CORNER CLEAT 4 x 10
CL52695
COUNTERSUNK RIVET
CSKR410
9.00
6.00
4.80
FINPILE
WP48500FG
WEDGE H1
VR313FG
WEDGE H42
VR5123FG
BUTTERFLY H8
VP512FG
BUTTERFLY H20
VP300FG
OF STAINLESS STEEL FRICTION STAYS
* MAINTENANCE
To preserve the appearance and prevent corrosion, wipe down Friction Stays with warm water and a mild detergent.
For stubborn dirt or stains, use a non corrosive cleaner, for more aggressive stains add a small amount of vinegar to water.
Carbon steel brushes and steel wool should be avioded as they may leave particles embedded in the surface which may
lead to rusting. After cleaning rinse with hot water and dry using a clean cloth.
Cleaning is recommended once a month or more frequently when subjected to regular use or heavy soiling.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 9
.crealco
CASEMENT 30.5
WINDOW SYSTEM
BUTTERFLY GASKET AND
WEDGE CODES
Est. 1946
Aluminium Profile Stockists
BUTTERFLY GASKET
W31139 BEAD
B01O
W02B
W01G
W03R
W04Y
WEDGES
5
4
2
7
2
6
2
5
8.38
6.38
6
2
4.62
2
2.62
CASEMENT 30.5 WITH W31139 BEAD
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 10
.crealco
CASEMENT 30.5
WINDOW SYSTEM
SASH LIMITATION CHARTS
Top Hung
W53631
Est. 1946
Aluminium Profile Stockists
Maximum Vent
Width
in mm
Maximum Vent
Height
in mm
1000
750
1000.00
Side Hung
W53631
Maximum Vent
Width
in mm
Maximum Vent
Height
in mm
600
1200
600.00
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 11
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TOP HUNG
600Pa WINDLOAD
Est. 1946
Aluminium Profile Stockists
NOTE:
1. SEE THE MULLION LIMITATION CHART
2. OPENING SIZES SHOWN IN RED
3. ACTUAL WINDOW SIZES SHOWN IN BLACK AND BRACKETS.
600
(590)
900
(890)
1 200
(1190)
1 500
(1490)
1 800
(1790)
2 400
(2390)
600
(590)
30.5 -0606T
30.5 -0906T
30.5 -1206T
30.5 -1506T
30.5 -1806TT
30.5 -2406TT
30.5 -0609T
30.5 -0909T
30.5 -1209T
30.5 -1509T
30.5 -1809TT
30.5 -2409TT
30.5 -0612T
30.5 -0912T
30.5 -1212DT
30.5 -1512DT
30.5 -1812DT
30.5 -2412DT
30.5 -0615DT 30.5 -0915DT
30.5 -1215DT
30.5 -1515DT
30.5 -1815DT
30.5 -2415DT
30.5 -0618DT 30.5 -0918DT
30.5 -1218DT
30.5 -1518DT
30.5 -1818DT
30.5 -2418DT
900
(890)
1200
(1190)
1500
(1490)
1800
(1790)
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 12
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TOP HUNG
1000Pa WINDLOAD
Est. 1946
Aluminium Profile Stockists
NOTE:
1. SEE THE MULLION LIMITATION CHART
2. OPENING SIZES SHOWN IN RED
3. ACTUAL WINDOW SIZES SHOWN IN BLACK AND BRACKETS.
600
(590)
900
(890)
1 200
(1190)
1 500
(1490)
1 800
(1790)
2 400
(2390)
600
(590)
30.5 -0606T
30.5 -0906T
30.5 -1206T
30.5 -1506T
30.5 -1806TT
30.5 -2406TT
30.5 -0609T
30.5 -0909T
30.5 -1209T
30.5 -1509T
30.5 -1809TT
30.5 -2409TT
30.5 -0612T
30.5 -0912T
30.5 -1212DT
30.5 -1512DT
30.5 -1812DT
30.5 -2412DT
30.5 -0615DT 30.5 -0915DT
30.5 -1215DT
30.5 -1515DT
30.5 -1815DT
30.5 -2415DT
30.5 -0618DT 30.5 -0918DT
30.5 -1218DT
30.5 -1518DT
30.5 -1818DT
30.5 -2418DT
900
(890)
1200
(1190)
1500
(1490)
1800
(1790)
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 13
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TOP HUNG
1500Pa WINDLOAD
Est. 1946
Aluminium Profile Stockists
NOTE:
1. SEE THE MULLION LIMITATION CHART
2. OPENING SIZES SHOWN IN RED
3. ACTUAL WINDOW SIZES SHOWN IN BLACK AND BRACKETS.
600
(590)
900
(890)
1 200
(1190)
1 500
(1490)
1 800
(1790)
2 400
(2390)
600
(590)
30.5 -0606T
30.5 -0906T
30.5 -1206T
30.5 -1506T
30.5 -1806TT
30.5 -2406TT
30.5 -0609T
30.5 -0909T
30.5 -1209T
30.5 -1509T
30.5 -1809TT
30.5 -2409TT
30.5 -0612T
30.5 -0912T
30.5 -1212DT
30.5 -1512DT
30.5 -1812DT
30.5 -2412DT
30.5 -0615DT 30.5 -0915DT
30.5 -1215DT
30.5 -1515DT
30.5 -1815DT
30.5 -2415DT
30.5 -0618DT 30.5 -0918DT
30.5 -1218DT
30.5 -1518DT
30.5 -1818DT
30.5 -2418DT
900
(890)
1200
(1190)
1500
(1490)
1800
(1790)
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 14
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD SIDE HUNG
600Pa WINDLOAD
Est. 1946
Aluminium Profile Stockists
NOTE:
1. SEE THE MULLION LIMITATION CHART
2. OPENING SIZES SHOWN IN RED
3. ACTUAL WINDOW SIZES SHOWN IN BLACK AND BRACKETS.
600
(590)
900
(890)
1 200
(1190)
1 500
(1490)
1 800
(1790)
2 400
(2390)
600
(590)
900
(890)
1200
(1190)
1500
(1490)
1800
(1790)
305 -0609S
305 -0909S
305 -1209S
305 -1509S
305 -1809SS
305 -2409SS
305 -0612S
305 -0912S
305 -1212S
305 -1512S
305 -1812SS
305 -2412SS
305 -0615S
305 -0915S
305 -1215S
305 -1515S
305 -1815SS
305 -2415SS
305 -0618S
305 -0918S
305 -1218S
305 -1518S
305 -1818SS
305 -2418SS
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 15
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD SIDE HUNG
1000Pa WINDLOAD
Est. 1946
Aluminium Profile Stockists
NOTE:
1. SEE THE MULLION LIMITATION CHART
2. OPENING SIZES SHOWN IN RED
3. ACTUAL WINDOW SIZES SHOWN IN BLACK AND BRACKETS.
600
(590)
900
(890)
1 200
(1190)
1 500
(1490)
1 800
(1790)
2 400
(2390)
600
(590)
900
(890)
1200
(1190)
1500
(1490)
1800
(1790)
305 -0609S
305 -0909S
305 -1209S
305 -1509S
305 -1809SS
305 -2409SS
305 -0612S
305 -0912S
305 -1212S
305 -1512S
305 -1812SS
305 -2412SS
305 -0615S
305 -0915S
305 -1215S
305 -1515S
305 -1815SS
305 -2415SS
305 -0618S
305 -0918S
305 -1218S
305 -1518S
305 -1818SS
305 -2418SS
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 16
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD SIDE HUNG
1500Pa WINDLOAD
Est. 1946
Aluminium Profile Stockists
NOTE:
1. SEE THE MULLION LIMITATION CHART
2. OPENING SIZES SHOWN IN RED
3. ACTUAL WINDOW SIZES SHOWN IN BLACK AND BRACKETS.
600
(590)
900
(890)
1 200
(1190)
1 500
(1490)
1 800
(1790)
2 400
(2390)
600
(590)
900
(890)
1200
(1190)
1500
(1490)
1800
(1790)
305 -0609S
305 -0909S
305 -1209S
305 -1509S
305 -1809SS
305 -2409SS
305 -0612S
305 -0912S
305 -1212S
305 -1512S
305 -1812SS
305 -2412SS
305 -0615S
305 -0915S
305 -1215S
305 -1515S
305 -1815SS
305 -2415SS
305 -0618S
305 -0918S
305 -1218S
305 -1518S
305 -1818SS
305 -2418SS
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 17
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TOP HUNG WINDOW
TYPICAL CONFIGURATIONS
Est. 1946
Aluminium Profile Stockists
A
BB
CC
SINGLE TOP HUNG
TOP HUNG
NEXT TO FIXED
TOP HUNG NEXT
TO TOP HUNG
B
C
E
TOP HUNG
OVER FIXED
TOP HUNG
OVER TOP HUNG
FIXED OVER
TOP HUNG
D
DD
EE
FIXED OVER
TOP HUNG
OVER FIXED
TRIPLE TOP HUNG
DOUBLE TOP HUNG
OVER FIXED
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 18
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD SIDE HUNG WINDOW
TYPICAL CONFIGURATIONS
Est. 1946
Aluminium Profile Stockists
A
B
SINGLE SIDE HUNG
SIDE HUNG
OVER FIXED
C
D
FIXED OVER
SIDE HUNG
TOP HUNG
OVER SIDE HUNG
CC
SIDE HUNG NEXT
TO SIDE HUNG
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 19
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE WINDOW
FIXED PANEL TYPICAL CONFIGURATIONS
Est. 1946
Aluminium Profile Stockists
B
A
1 x 2 FIXED PANEL
1 x 3 FIXED PANEL
C
D
3 x 1 FIXED PANEL
2 x 1 FIXED PANEL
E
F
G
2 x 2 FIXED PANEL
2 x 3 FIXED PANEL
2 x 4 FIXED PANEL
H
I
J
3 x 2 FIXED PANEL
3 x 3 FIXED PANEL
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 20
3 x 4 FIXED PANEL
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE WINDOW
TOP HUNG & SIDE HUNG
TYPICAL CONFIGURATIONS
Est. 1946
Aluminium Profile Stockists
TOP HUNG
R
P
2 x 1 PANE
SINGLE TOP HUNG
3 x 1 PANE
SINGLE TOP HUNG
Q
S
3 x 2 PANE
SINGLE TOP HUNG
2 x 2 PANE
SINGLE TOP HUNG
SIDE HUNG
Q
P
2 x 4 PANE
SINGLE SIDE HUNG
2 x 3 PANE
SINGLE SIDE HUNG
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 21
.crealco
CASEMENT 30.5
WINDOW SYSTEM
FIXING DETAILS
Est. 1946
Aluminium Profile Stockists
150
150
Max. 750
150
Max. 750
150
150
Max. 750
Max. 750
150
General:
The window is fixed into position - the sill is then built at a later stage - the bottom lugs can be left in place
but it is often found that most times the mason either bends them out of his way or breaks them off.
This practically means that most windows are only secured on 3 sides.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 22
.crealco
CASEMENT 30.5
WINDOW SYSTEM
TYPICAL CROSS SECTIONAL DETAIL
DOUBLE TOP HUNG OVER FIXED
Est. 1946
Aluminium Profile Stockists
SECTION B - B
B
SHOWING TRANSOM WITH
WEATHER BAR OVERLAP
A
A
C
C
B
W53630
SECTION A - A
W27990
W53631
W53631
W27991
22.68
53.26
55.76
W53629
SECTION C - C
W27990
W27991
W27991
30.58
W27990
33.08
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 23
.crealco
CASEMENT 30.5
WINDOW SYSTEM
TYPICAL CROSS SECTIONAL DETAIL
SIDE HUNG OVER FIXED
Est. 1946
Aluminium Profile Stockists
B
SECTION B - B
A
A
C
C
W53631
B
SECTION A - A
W27990
W53629
W53631
W27991
W27991
22.68
53.26
W27990
55.76
SECTION C - C
W27990
W27991
30.58
33.08
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 24
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE TYPICAL
CROSS SECTIONAL DETAIL
2 x 2 TOP HUNG OVER
2 x 1 FIXED PANEL
Est. 1946
Aluminium Profile Stockists
SECTION B - B
B
A
A
C
C
W54867
B
W53631
SECTION A - A
W27990
W53629
W53631
W54867
W27991
22.68
53.26
55.76
W27991
SECTION C - C
W27990
W54867
W27991
W27990
30.58
33.08
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 25
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE TYPICAL CROSS SECTIONAL DETAIL
SIDE HUNG OVER FIXED
Est. 1946
Aluminium Profile Stockists
B
SECTION B - B
A
A
C
C
W50959
B
SECTION A - A
W55009
W50959
W55008
W27991
W27991
22.68
53.26
W55009
55.76
SECTION C - C
W55009
W27991
30.58
33.08
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 26
.crealco
CASEMENT 30.5
WINDOW SYSTEM
OUTER FRAME COMPONENT
ASSEMBLY DETAIL
Est. 1946
Aluminium Profile Stockists
W27990
W27990
FINPILE
W27989
CORNER CLEAT
W27990
W27990
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 27
.crealco
CASEMENT 30.5
WINDOW SYSTEM
SASH FRAME COMPONENT
ASSEMBLY DETAIL
Est. 1946
Aluminium Profile Stockists
W53631
W27989
CORNER CLEAT
POP RIVETS
W53631
HANDLE WITH
SCREWS
FRICTION STAY
FINPILE
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 28
.crealco
CASEMENT 30.5
WINDOW SYSTEM
EQUAL LEG OUTER FRAME
SILL LEVEL & MACHINING DETAIL
Est. 1946
Aluminium Profile Stockists
W27990
VIEW A
VIEW A
VIEW B
W27990
VIEW B
45°
W27990
W27990
FINISHED SILL
LEVEL (INSIDE)
FINISHED
SILL LEVEL
(OUTSIDE)
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 29
.crealco
CASEMENT 30.5
WINDOW SYSTEM
UNEQUAL LEG OUTER FRAME
SILL LEVEL & MACHINING DETAIL
Est. 1946
Aluminium Profile Stockists
W27992
VIEW A
VIEW A
VIEW B
W27992
VIEW B
45°
W27992
FINISHED SILL
LEVEL (INSIDE)
W27992
FINISHED SILL
LEVEL (OUTSIDE)
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 30
.crealco
CASEMENT 30.5
WINDOW SYSTEM
54mm OUTER FRAME
SILL LEVEL & MACHINING DETAIL
Est. 1946
Aluminium Profile Stockists
W28481
VIEW A
VIEW A
VIEW B
W28481
VIEW B
W28481
23.88
4.00
26.50
W28481
FINISHED SILL
LEVEL (INSIDE)
FINISHED SILL
LEVEL (OUTSIDE)
23.50
40.10
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 31
.crealco
CASEMENT 30.5
WINDOW SYSTEM
70mm OUTER FRAME
SILL LEVEL & MACHINING DETAIL
Est. 1946
Aluminium Profile Stockists
W70968
VIEW A
VIEW A
VIEW B
W70968
VIEW B
W70968
3.796
39.50
26.704
W70968
FINISHED SILL
LEVEL (INSIDE)
FINISHED SILL
LEVEL (OUTSIDE)
34.284
50.50
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 32
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE EQUAL LEG OUTER FRAME
SILL LEVEL & MACHINING DETAIL
Est. 1946
Aluminium Profile Stockists
W55009
VIEW A
VIEW A
VIEW B
W55009
VIEW B
45°
W55009
W55009
FINISHED SILL
LEVEL (INSIDE)
FINISHED
SILL LEVEL
(OUTSIDE)
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 33
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD MULLION MACHINING
DETAIL FOR END MILLING
ON EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W53629
VIEW A
STANDARD MULLION
W53629
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27990
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 34
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD MULLION MACHINING
DETAIL FOR END MILLING
ON UNEQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W53629
VIEW A
STANDARD MULLION
W53629
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27992
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 35
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD MULLION MACHINING
DETAIL FOR END MILLING
ON 54mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W53629
VIEW A
STANDARD MULLION
W53629
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W28481
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 36
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD MULLION MACHINING
DETAIL FOR END MILLING
ON 70mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W53629
VIEW A
STANDARD MULLION
W53629
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W70968
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 37
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD MULLION MACHINING
DETAIL FOR END MILLING
ON LITE EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W53629
VIEW A
STANDARD MULLION
W53629
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W55009
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 38
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TRANSOM WITH W/B
MACHINING DETAIL FOR END MILLING
ON EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W27990
VIEW A
STANDARD TRANSOM
WITH W/B
W53630
EXPLODED VIEW
SHOWING TRANSOM
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING TRANSOM
AGAINST FRAME
W53630
VIEW A
VIEW B
61.80
28.00
23.00
4.00
8.50
13.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 39
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TRANSOM WITH W/B
MACHINING DETAIL FOR END MILLING
ON UNEQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W27992
VIEW A
STANDARD TRANSOM
WITH W/B
W53630
EXPLODED VIEW
SHOWING TRANSOM
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING TRANSOM
AGAINST FRAME
W53630
VIEW A
VIEW B
61.80
28.00
23.00
4.00
8.50
13.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 40
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TRANSOM WITH W/B
MACHINING DETAIL FOR END MILLING
ON 54mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W28481
VIEW A
STANDARD TRANSOM
WITH W/B
W53630
EXPLODED VIEW
SHOWING TRANSOM
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING TRANSOM
AGAINST FRAME
W53630
VIEW A
VIEW B
61.80
28.00
23.00
4.00
8.50
13.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 41
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TRANSOM WITH W/B
MACHINING DETAIL FOR END MILLING
ON 70mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W70968
VIEW A
STANDARD TRANSOM
WITH W/B
W53630
EXPLODED VIEW
SHOWING TRANSOM
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING TRANSOM
AGAINST FRAME
W53630
VIEW A
VIEW B
61.80
28.00
23.00
4.00
8.50
13.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 42
.crealco
CASEMENT 30.5
WINDOW SYSTEM
STANDARD TRANSOM WITH W/B
MACHINING DETAIL FOR END MILLING
ON LITE EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W55009
VIEW A
STANDARD TRANSOM
WITH W/B
W53630
EXPLODED VIEW
SHOWING TRANSOM
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING TRANSOM
AGAINST FRAME
W53630
VIEW A
VIEW B
61.80
28.00
23.00
4.00
8.50
13.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 43
.crealco
CASEMENT 30.5
WINDOW SYSTEM
54mm MULLION MACHINING
DETAIL FOR END MILLING
ON EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W54651
VIEW A
54mm MULLION
W54651
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27990
VIEW B
61.80
28.60
28.00
23.50
23.00
4.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 44
.crealco
CASEMENT 30.5
WINDOW SYSTEM
54mm MULLION MACHINING
DETAIL FOR END MILLING
ON UNEQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W54651
VIEW A
54mm MULLION
W54651
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27992
VIEW B
61.80
28.60
28.00
23.50
23.00
4.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 45
.crealco
CASEMENT 30.5
WINDOW SYSTEM
54mm MULLION MACHINING
DETAIL FOR END MILLING
ON 54mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
54mm MULLION
W54651
W54651
VIEW A
VIEW C
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W28481
VIEW B
61.80
28.60
4.00
23.00
2.50
23.50
VIEW B
24.00
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 46
.crealco
CASEMENT 30.5
WINDOW SYSTEM
54mm MULLION MACHINING
DETAIL FOR END MILLING
ON 70mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
54mm MULLION
W54651
W54651
VIEW A
VIEW C
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
VIEW B
W70968
61.80
28.60
3.80
23.00
2.50
23.50
VIEW B
24.20
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 47
.crealco
CASEMENT 30.5
WINDOW SYSTEM
54mm MULLION MACHINING
DETAIL FOR END MILLING
ON LITE EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W54651
VIEW A
54mm MULLION
W54651
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W55009
VIEW B
61.80
28.60
28.00
23.50
23.00
4.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 48
.crealco
CASEMENT 30.5
WINDOW SYSTEM
70mm MULLION MACHINING
DETAIL FOR END MILLING
ON EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
70mm MULLION
W54652
W54652
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27990
VIEW B
61.80
28.60
28.00
39.50
23.00
4.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 49
.crealco
CASEMENT 30.5
WINDOW SYSTEM
70mm MULLION MACHINING
DETAIL FOR END MILLING
ON UNEQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
70mm MULLION
W54652
W54652
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27992
VIEW B
61.80
28.60
28.00
39.50
23.00
4.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 50
.crealco
CASEMENT 30.5
WINDOW SYSTEM
Aluminium Profile Stockists
70mm MULLION MACHINING
DETAIL FOR END MILLING ON 54mm OUTER FRAME
Est. 1946
W54652
VIEW A
70mm MULLION
W54652
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W28481
61.80
28.60
28.00
23.00
VIEW B
15.60 23.90
2.50
4.00
24.00
VIEW C
VIEW B
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 51
.crealco
CASEMENT 30.5
WINDOW SYSTEM
70mm MULLION MACHINING
DETAIL FOR END MILLING
ON 70mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
70mm MULLION
W54652
W54652
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W70968
VIEW B
61.80
28.60
23.00
4.00
39.50
2.50
24.00
VIEW C
VIEW B
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 52
.crealco
CASEMENT 30.5
WINDOW SYSTEM
70mm MULLION MACHINING
DETAIL FOR END MILLING
ON LITE EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
70mm MULLION
W54652
W54652
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W55009
VIEW B
61.80
28.60
28.00
39.50
23.00
4.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 53
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE MULLION
MACHINING DETAIL FOR END MILLING
ON EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
COTTAGE PANE MULLION
W54867
W54867
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27990
VIEW B
47.80
14.00
4.00
9.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 54
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE MULLION
MACHINING DETAIL FOR END MILLING
ON UNEQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
COTTAGE PANE MULLION
W54867
W54867
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27992
VIEW B
47.80
14.00
4.00
9.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 55
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE MULLION
MACHINING DETAIL FOR END MILLING
ON 54mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
COTTAGE PANE MULLION
W54867
W54867
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W28481
VIEW B
47.80
14.00
4.00
9.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 56
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE MULLION
MACHINING DETAIL FOR END MILLING
ON 70mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
COTTAGE PANE MULLION
W54867
W54867
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W70968
VIEW B
47.80
14.00
4.00
9.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 57
.crealco
CASEMENT 30.5
WINDOW SYSTEM
COTTAGE PANE MULLION
MACHINING DETAIL FOR END MILLING
ON LITE EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
COTTAGE PANE MULLION
W54867
W54867
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W55009
VIEW B
47.80
14.00
4.00
9.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 58
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE MULLION MACHINING
DETAIL FOR END MILLING
ON EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W55008
VIEW A
LITE MULLION
W55008
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27990
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 59
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE MULLION MACHINING
DETAIL FOR END MILLING
ON UNEQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W55008
VIEW A
LITE MULLION
W55008
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W27992
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 60
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE MULLION MACHINING
DETAIL FOR END MILLING
ON 54mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W55008
VIEW A
LITE MULLION
W55008
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W28481
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 61
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE MULLION MACHINING
DETAIL FOR END MILLING
ON 70mm OUTER FRAME
Est. 1946
Aluminium Profile Stockists
VIEW A
LITE MULLION
W55008
W55008
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW A
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W70968
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 62
.crealco
CASEMENT 30.5
WINDOW SYSTEM
LITE MULLION MACHINING
DETAIL FOR END MILLING
ON LITE EQUAL LEG OUTER FRAME
Est. 1946
Aluminium Profile Stockists
W55008
VIEW A
LITE MULLION
W55008
VIEW A
EXPLODED VIEW
SHOWING MULLION
AGAINST FRAME
VIEW C
ISOMETRIC VIEW
SHOWING MULLION
AGAINST FRAME
W55009
VIEW B
61.80
28.00
4.00
23.00
2.50
24.00
VIEW B
VIEW C
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 63
.crealco
CASEMENT 30.5
WINDOW SYSTEM
CORNER CLEAT ASSEMBLY DETAIL
FOR TUBULAR SASH
Est. 1946
Aluminium Profile Stockists
W27989
NOTE:
ALL JOINTS MUST BE SEALED WITH
SMALL JOINT SEALANT. FINPILE
MUST BE FITTED TO SASH AND
CORRESPONDING SURFACES OF
FRAME BEFORE CRIMPING (NOT
TO AREAS TO BE GLAZED)
W53631
VIEW A
THE CORNER CLEAT HAS BEEN
SPECIALLY DESIGNED SO THAT THE
CORNER CAN BE CRIMPED EITHER
FROM THE INSIDE WITH A HAND
OPERATED CRIMPING MACHINE
OR FROM THE OUTSIDE WITH A
HYDRAULICALLY OPERATED
CRIMPING MACHINE
W27989
VIEW A
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 64
.crealco
CASEMENT 30.5
WINDOW SYSTEM
CORNER CLEAT ASSEMBLY DETAIL
FOR LITE TUBULAR SASH
Est. 1946
Aluminium Profile Stockists
W27989
NOTE:
ALL JOINTS MUST BE SEALED WITH
SMALL JOINT SEALANT. FINPILE
MUST BE FITTED TO SASH AND
CORRESPONDING SURFACES OF
FRAME BEFORE CRIMPING (NOT
TO AREAS TO BE GLAZED)
W50959
VIEW A
W27989
THE CORNER CLEAT HAS BEEN
SPECIALLY DESIGNED SO THAT THE
CORNER CAN BE CRIMPED EITHER
FROM THE INSIDE WITH A HAND
OPERATED CRIMPING MACHINE
OR FROM THE OUTSIDE WITH A
HYDRAULICALLY OPERATED
CRIMPING MACHINE
VIEW A
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 65
.crealco
CASEMENT 30.5
WINDOW SYSTEM
GLAZING BAR FRAME JOINT
ASSEMBLY DETAIL
Est. 1946
Aluminium Profile Stockists
NOTE: ALL JOINTS MUST BE SEALED WITH SMALL
JOINT SEALANT. FINPILE MUST BE FITTED
PRIOR TO ASSEMBLY IF SASH IS TO BE FITTED
INTO FRAME. FINPLIE MUST NOT RUN
BEHIND GLAZING BAR AND GAP MUST BE
SEALED TO PREVENT WATER INFILTRATION.
W53629
W53631
MP305
ø 4.8mm HOLES
14mm c/c
STPPS830
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 66
.crealco
CASEMENT 30.5
WINDOW SYSTEM
GLAZING BAR FRAME JOINT
ASSEMBLY DETAIL
Est. 1946
Aluminium Profile Stockists
NOTE: ALL JOINTS MUST BE SEALED WITH SMALL
JOINT SEALANT. FINPILE MUST BE FITTED
PRIOR TO ASSEMBLY IF SASH IS TO BE FITTED
INTO FRAME. FINPLIE MUST NOT RUN
BEHIND GLAZING BAR AND GAP MUST BE
SEALED TO PREVENT WATER INFILTRATION.
W55008
W50959
MP305
ø 4.8mm HOLES
14mm c/c
STPPS830
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 67
.crealco
CASEMENT 30.5
WINDOW SYSTEM
CROSS JOINT ASSEMBLY DETAIL
STANDARD MULLION
Est. 1946
Aluminium Profile Stockists
NOTE: ALL JOINTS MUST BE SEALED WITH SMALL
JOINT SEALANT. FINPILE MUST BE FITTED
PRIOR TO ASSEMBLY IF SASH IS TO BE FITTED
INTO FRAME. FINPILE MUST NOT RUN
BEHIND GLAZING BAR AND GAP MUST BE
SEALED TO PREVENT WATER INFILTRATION.
MULLION ENDS MILLED
TO ENGAGE MULLION
W53629
8x30 P/HEAD POSI
S/S ST SCREW
STPPS830
W53629
CC305
SHOWING FINPILE MEETING
AND NOT RUNNING TO EDGE
OF THE PROFILE
SILICONE SEALANT
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 68
.crealco
CASEMENT 30.5
WINDOW SYSTEM
CROSS JOINT ASSEMBLY DETAIL
LITE MULLION
Est. 1946
Aluminium Profile Stockists
NOTE: ALL JOINTS MUST BE SEALED WITH SMALL
JOINT SEALANT. FINPILE MUST BE FITTED
PRIOR TO ASSEMBLY IF SASH IS TO BE FITTED
INTO FRAME. FINPILE MUST NOT RUN
BEHIND GLAZING BAR AND GAP MUST BE
SEALED TO PREVENT WATER INFILTRATION.
MULLION ENDS MILLED
TO ENGAGE MULLION
W55008
8x30 P/HEAD POSI
S/S ST SCREW
STPPS830
W55008
CC305
SHOWING FINPILE MEETING
AND NOT RUNNING TO EDGE
OF THE PROFILE
SILICONE SEALANT
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 69
.crealco
CASEMENT 30.5
WINDOW SYSTEM
CROSS JOINT ASSEMBLY DETAIL
COTTAGE PANE MULLION
Est. 1946
Aluminium Profile Stockists
W54867
MULLION ENDS MILLED
TO ENGAGE MULLION
6x30 P/HEAD POSI
S/S ST SCREW
STPPS630
W54867
CPC28
NOTE: ALL JOINTS MUST BE SEALED WITH SMALL
JOINT SEALANT. FINPILE MUST BE FITTED
PRIOR TO ASSEMBLY IF SASH IS TO BE FITTED
INTO FRAME. FINPILE MUST NOT RUN
BEHIND GLAZING BAR AND GAP MUST BE
SEALED TO PREVENT WATER INFILTRATION.
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 70
.crealco
CASEMENT 30.5
WINDOW SYSTEM
GLAZING PROCEDURE
Est. 1946
Aluminium Profile Stockists
Insert the pull-in vinyl gasket into
glazing beads by sliding or
pressing it into the groove (1).
Before cutting gasket, ensure
that it has not stretched and cut
6mm longer so that corners are
in compression at all times.
1
Position bottom glazing bead in
glazing bead rebate (2).
Place glass on glazing blocks (3).
6mm GLASS
Insert top and then side glazing
beads ensuring that they are in
correctly.
2
Starting from top centre, insert
roll in gasket (4) without
stretching it (5). Stop 150mm from
corner and partly cut gasket
6mm longer than the edge of the
vertical bead. Insert gasket at
corner and then roll in remaining
150mm. Repeat this on the other
sides. Where gasket ends meet,
cut gasket 6mm longer. Insert
cut ends first and complete.
3 AND 4mm GLASS
GLAZING BLOCK
3
ENSURE GASKETS ARE NOT
STRETCHED AT ANY STAGE
TOP
SEEN FROM THE INSIDE
START
END
NOTCH GASKET
AT CORNERS
5
4
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 71
.crealco
CASEMENT 30.5
WINDOW SYSTEM
GLAZING PROCEDURE
Est. 1946
Aluminium Profile Stockists
GLAZING
1.
SELECTION OF GLAZING METHODS
1.1
SETTING AND LOCATION BLOCKS
Glass-to-metal contact must be avoided at all times by using setting and location blocks
having a hardness of 50° to 90° shore A durometer. Use only blocks made of Neoprene,
EPDM, Silicone or other elastomeric material.
Setting blocks are to have a minimum thickness of 3mm and must be at least 27mm in
length per square metre of glass area.
In the event of laminated glass and/or sealed insulated glass units drainage is to be
provided to prevent the glass edge to be submerged. Two or more 7mm diameter holes or
5mm x 9mm slotted holes, or larger, are to be equally spaced in the sill section of sash or
frame to allow for such ventilation/drainage.
The position of the setting and location blocks is illustrated in Figure 2.
SB over pivot
SB over pivot
a) Fixed Light
b) Vertically pivoted
(hung off-centre)
c) Vertically pivoted
(hung centrally)
d) Top Hung
e) Bottom Hung
f) Side Hung or door
g) Horizontally pivoted
and reversible
h) Horizontally sliding;
6 blocks to each pane
i) Vertically sliding
FIGURE 2 - POSITION OF SETTING AND LOCATION BLOCKS
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 72
.crealco
CASEMENT 30.5
WINDOW SYSTEM
FRICTION STAY ASSEMBLY DETAIL
Est. 1946
Aluminium Profile Stockists
14.00
FRAME
SASH
INSIDE
THE FRICTION STAY SHOULD ALWAYS BE FITTED
AS FAR FORWARD IN THE FRAME AS POSSIBLE.
(AS ILLUSTRATED)
THE ARM FIXED TO THE SASH SHOULD BE FITTED
TO ALLOW CORRECT COMPRESSION OF THE
FINPILE AND PACKED TO CLEAR GLAZING
BEAD NIB.
THE STAYS ARE SECURED WITH 4.8 x 10 DOME
HEAD RIVETS.
STAY CODE TO BE USED FOR SASH SIZE
FS202FG
LESS THAN OR EQUAL TO 300mm
FS304FG
BETWEEN 301mm AND 450mm
FS406FG
BETWEEN 451mm AND 600mm
FS508FG
BETWEEN 601mm AND 750mm
FS600FG
GREATER THAN 750mm
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 73
.crealco
CASEMENT 30.5
WINDOW SYSTEM
HANDLE ASSEMBLY DETAIL
Est. 1946
Aluminium Profile Stockists
W53631
VIEW A
NO 8 x 10 COUNTERSUNK SELF-TAPPING
FLAT END SCREWS
ø 3.5mm
30.50
W53631
VIEW A
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 74
.crealco
CASEMENT 30.5
WINDOW SYSTEM
FIXING LUG PREPARATION DETAIL
Est. 1946
Aluminium Profile Stockists
TWIST IN LUG FITTED TO
EQUAL LEG OUTER FRAME
TWIST IN LUG FITTED TO
UNEQUAL LEG OUTER FRAME
Disclaimer: The right to make alterations is reserved
© 2012 Wispeco (Pty) Ltd, All Rights Reserved
PAGE 75
.crealco