Download USER`S MANUAL

S3C831B/P831B
INSTRUCTION SET
LDCPI/LDEPI — Load Memory with Pre-Increment
LDCPI/
LDEPI
dst,src
Operation:
rr ← rr + 1
dst ← src
These instructions are used for block transfers of data from program or data memory from the
register file. The address of the memory location is specified by a working register pair and is
first incremented. The contents of the source location are loaded into the destination location.
The contents of the source are unaffected.
LDCPI refers to program memory and LDEPI refers to external data memory. The assembler
makes 'Irr' an even number for program memory and an odd number for data memory.
Flags:
No flags are affected.
Format:
opc
Examples:
Bytes
Cycles
Opcode
(Hex)
2
14
F3
src | dst
Addr Mode
dst
src
Irr
r
Given: R0 = 7FH, R6 = 21H, and R7 = 0FFH:
LDCPI
@RR6,R0
;
;
;
;
(RR6 ← RR6 + 1)
7FH (contents of R0) is loaded into program memory
location 2200H (21FFH + 1H)
R0 = 7FH, R6 = 22H, R7 = 00H
LDEPI
@RR6,R0
;
;
;
;
(RR6 ← RR6 + 1)
7FH (contents of R0) is loaded into external data memory
location 2200H (21FFH + 1H)
R0 = 7FH, R6 = 22H, R7 = 00H
6-57