Download User Manual

MAINTENANCE & CLEANING
CONDENSER COIL
How to remove Louver
1. Disconnect the electrical power to the unit
2. Lift up the Louver to release the Louver from the body (①).
3. Pull the Louver toward you (②).
4. Pull on the downward (③).
5. Brush the dirt, lint, etc from the finned condenser coil.
6. When finished, Louver installed by reverse way of removing.
7. Reconnect the electrical power to the unit.
8. Condenser should be cleaned every 1 months or as needed.
EVAPORATOR COIL
1. Remove the glass door and Boottom shelf (①).
2. Join the drain hose (②).
3. Sweep evaporator pins with warm water and brush.
4. Clean up with soft cloth the evaporator pins.
5. When finished cleaning off properly, remove the drain hose.
6. Reconnect the Glass door and Bottom shelf.
6