Download e-480sc a modifier

OPERATION
4.
5.
6.
7.
8.
If not assembled before shipment, connect cable to control console provided and install
console on platform railing. Pull emergency stop button if it has been depressed (Figure 6).
If wheels have not been installed, install them.
Pull emergency stop button on lower control station if it has been depressed (Figure 6).
Check oil level in hydraulic reservoir (see sight glass). See next page fill-up procedure.
Inspect machine for hydraulic oil leaks. Do not use the machine until leaks are serviced.
SCISSOR LIFT OPERATION PROCEDURE
9.
10.
11.
Turn key switch at “lift” position.
Fully extend stabilizers using toggle switch at “stab” position at lower control station.
Make sure legs will stand on even surface.
Move up platform using toggle switch at “up” position at lower control station or using
toggle switch “up” position* (upper control station). To stop platform movement,
release the toggle.
*If you have 2-speed option: Lower station default is “up fast” while upper station default is
“upslow”, Simply press “upslow” switch and “fast” button at the same time to get “upfast”
function.
Figure 6. Controls
12.
13.
MAKE SURE MAINTENANCE LOCK IS SECURELY POSITIONED ON ITS
SUPPORT AND WON’T DISTURB BEAN MOVEMENT.
Use toggle switch at “down” position to move platform downward (any station). To
stop platform movement, release the toggle.
- 15 -