Download MP-0074, Rev E

OPERATOR MANUAL..
Condition
Duty Cycle
Exceeded
Alarm
Visual
Indicator
Audible
Signal ;Ò
Double tone
COOLING DOWN at the start
and end of
[count down]
the cool down
cycle
Function /
Resolution
If the operator presses the trigger to activate the
READY state before the duty cycle time, the
device will display the warning message, and a
countdown timer will be displayed showing the
duty cycle time remaining. This will lock the
device and the message will be displayed until
the duty cycle is complete. The device will then
return to the normal operation mode.
Ensure the Handset is locked in place.
Low Battery
Alarm
Incomplete
Exposure
Alarm
System
Failure
Alarm
Handset
Failure
RECHARGE
HANDSET
5 audible
tones
Activates if trigger is released before the timed
X-ray exposure finishes.
INCOMPLETE
A warning
(PRESS ANY KEY) tone
CALL
MANUFACTURE
HANDSET
FAILURE
This condition is cleared by pressing any button
on the user interface panel or by tuning the
power off then on.
Depress the trigger for the duration of the
exposure time.
0.38sec……....
SYSTEM
FAILURE
The RECHARGE HANDSET alert terminates after
five seconds and goes into auto-shutdown.
Replace the current Handset with a freshly
charged Handset.
NOTE: If battery voltage is lower than required
for the X-ray exposure, the device will not allow
the exposure.
Descending
tone
Consult Section 6.2, Troubleshooting (6.2.8) or
an Aribex authorized service center.
5 audible
tones
Consult Section 6.2, Troubleshooting (6.2.12) or
an Aribex authorized service center.
Alarm
NOMAD Pro should not be operated if it has been dropped or performance degrades; it
should be returned to Aribex for a safety check.
19