Download User Manual

7
7.1
Using the utility mode
Machine settings
From the MACHINE SETTING menu, various settings for the machine’s operating environment can be specified. Refer to the following table for details
on each function.
No.
7-4
Name
Description
1
AUTO PANEL RESET
Whether the auto panel reset function is disable or the time
(0.5 min, 1 min, 2 min, 3 min, 4 min, or 5 min) until the machine is
reset after finishing copying/printing or after performing the last
operation can be selected. If the auto panel reset function is enabled, all functions are automatically reset to their default settings.
• Default setting: 1 min.
2
ENERGY SAVE
MODE
If the machine performs no operations for a set length of time, it
will automatically enter the energy save mode. The length of time
until the machine enters energy save mode can be set between 1
and 240 min (in 1 min increments).
• Default setting: 15 min.
3
AUTO SHUT OFF
This function can be used to set the length of time until the machine automatically turns off after the last operation is finished.
• The manufacturer’s default setting is “OFF”.
4
DENSITY (ADF)
The scanning density when using the optional document feeder
can be adjusted.
Mode 1:
For printing lighter copies of dark documents to avoid darkening
of copies.
Mode 2:
For printing copies with same density as documents.
• Default setting: Mode 1.
5
DENSITY (BOOK)
The density when scanning from the original glass can be adjusted.
Mode 1:
For printing copies with same density as documents.
Mode 2:
For printing lighter copies of dark documents to avoid darkening
of copies.
• Default setting: Mode 1.
6
PRINT DENSITY
The copy/print density can be adjusted to one of five levels.
• Default setting:
.
7
LCD CONTRAST
The brightness of the display can be set to one of four levels.
• Default setting:
.
8
LANGUAGE
The display language can be selected.
• Default setting: English.
bizhub 162/210