Transcript
INSTRUCTIONS DAYSPOT 60W GROW LIGHT LKIT60 KIT INCLUDES SPECIFICATIONS • Reflector - 1 each Volts: 120V / 60Hz • Clamp arm socket - 1 each Cord length: 5.5 ft • Agrosun Dayspot incandescent bulb - 1 each Weight: Approx. 1 lb. ASSEMBLY 1. Carefully remove the fixture from the box. 2. Center the reflector onto the clamp arm socket and thread it on to secure it in place. 3. Using the clamp arm, attach the fixture in a desired location to a secure base above your plant canopies. 4. Point the reflector in the desired direction and tighten the wing nut on the clamp arm to secure the position. SPECIAL NOTES AND INSTRUCTIONS • This fixture should be mounted at a safe distance from plants to prevent burning and provide adequate coverage.( See the illumination chart indicated on the package) • A timer (item# TM01015) will help make light cycles automatic • Plug this fixture into a 120V outlet only • Do not use a dimmer with this product • Avoid contact with water to prevent damage and risk of electric shock www.hydrofarm.com LKIT60 Instructions - rev 4.28.15
