Download myUTN User Manual Linux

General Information
1.5
First Steps
This section provides all the information that you need for a fast
operational readiness.
1.
2.
3.
4.
5.
6.

myUTN User Manual Linux
Proceed as follows:
Read and observe the security regulations in order to avoid
damages to people and devices; see: 12.
Carry out the hardware installation. The hardware installation
comprises the connection of the UTN server to the network, the
USB device and the power supply; see: 'Quick Installation
Guide'.
Make sure that an IP address is stored in the UTN server; see:
14.
Install and start the software tool 'SEH UTN Manager' on your
Windows client; see: 21.
Add the UTN servers that you want to use to the selection list;
see: 62.
Activate the connection between your client and the USB port
to which the USB device is connected; see: 63.
The connection will be established. The USB device can be used
by the client.
13