Download Programmer`s Manual for Mechanical APDL application

7.6.2. eprget Function (Getting an Element Face Pressure)
c
c
c
output arguments:
none.
7.6. Element Loading Routines
7.6.1. epriqr Function (Getting Information About Element Pressure/Convection)
*deck,epriqr
function epriqr (ielem,iface,key)
c *** primary function: get information about element pressure/convection
c *** Notice - This file contains ANSYS Confidential information ***
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
input arguments:
ielem
(int,sc,in)
c
c
c
output arguments:
epriqr
(int,func,out)
iface
(int,sc,in)
key
(int,sc,in)
= 1
= 5
- element number
should be zero for key=DB_NUMDEFINED or
DB_MAXRECLENG
- face number for inquire (0-6)
face number is needed for key=5. for
other values of key, iface has different
meaning (see below)
- key as to the information needed
- return pressure mask for element
- return number of pressures for this
element face
= DB_NUMDEFINED,
= DB_MAXDEFINED - return value is based on setting of iface
NOTE: both DB_NUMDEFINED and
DB_MAXDEFINED produce the same
functionality
iface = 0 - return number of surface loads defined
= 1-6 - return number of pressure loads
defined for this element.
NOTE: only 1-6 is valid, but this
routine simply checks that iface is in
the range. The actual value of iface
does not matter in this case.
= DB_MAXRECLENG - return the maximum number of element
pressures on any element (max record
length)
- the returned value of epriqr is based on
setting of key.
7.6.2. eprget Function (Getting an Element Face Pressure)
*deck,eprget
function eprget (elem,iface,value)
c *** primary function:
get an element face pressure
c *** Notice - This file contains ANSYS Confidential information ***
c
c
c
c
input arguments:
elem
(int,sc,in)
c
c
c
c
output arguments:
eprget
(int,func,out)
iface
(int,sc,in)
- element number (negative value for
no partabeval)
- face number (1-68)
- status of element.
=-1 - element has no pressures
= 0 - this element face has no pressures
Release 12.1 - © 2009 SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
245