Download End User Manual - Install and use the SMS token

FOR INTERNAL USE ONLY
Page 1 of 2
April 23, 2015
End User Manual ‘Install and
use the SMS token’
DBS
IT SHARED SERVICES
GIS
Poststraat 1
6135 KR Sittard
P.O. Box 43
Netherlands
This procedure is being divided into the following parts:
A. Configure Token and PIN-code (First time)
B. Login to DSM Strong Authentication Service
A. Configure Token and PIN-code
1. For the access to DSM with
a token you will receive a
SMS text message to
finalize the soft token
request
On your mobile phone
locate the text message
sent by ‘DSMSAS’
The text message contains
your User ID and Initial
PIN. The Initial PIN is
temporary and needs to
be changed into a PINcode which is easy to
remember for you
2. When you need to use
your token you will be
prompted with the
following screen
FOR INTERNAL USE ONLY
Page 1 of 2
April 23, 2015
3. At AuroraID type in your
User ID from the SMS
Type the One-Time
Password:
PIN+TokenCode
Example:30226F2D3FW98
Note: Do not type the plus (+)
sign
Click Login
4. At the first logon a new
PIN is required
Choose a new PIN (min. 5
numbers, max. 16
numbers) and type it
twice
Example: 54321
Note: make sure you can
remember the PIN code
Click Login
5. After typing your new PIN
twice you will
immediately receive a
new text message with a
new TokenCode
Note: Always use the last
text message you
received from DMSSAS
FOR INTERNAL USE ONLY
Page 1 of 2
April 23, 2015
B. Login to DSM Strong Authentication Service
1. On the following screen
you need to login with
your token.
2. At AuroraID type in your
User ID received in your
first SMS
Type the One-Time
Password:
PIN+TokenCode
Example:54321GC5DL91U
Note: Do not type the plus (+)
sign
Note: Always use the last
text message you
received from DMSSAS
Click Login