Download JRC 250 User Manual View /

5.
5.1.7
How to use the telephone/FAX
Passing a call from Handset to terminal telephone
To pass a call to one of the terminal telephones (connected to BDE), press the extension number during
communication.
Extension numbers of the JUE-250 are designated as follows.
Terminal telephone connected with TEL port 1…..#+1.
Terminal telephone connected with TEL port 2…..#+2.
Handset………………………………........………#+3.
On communication screen
HDST-VOICE
12m29s
COMM(SND)
Press the extension number(to be transferred).
Press # 1 to transfer
to the terminal telephone connected with TEL port 1.
Press # 2 to transfer the telephone connected with TEL port 2 .
Press the on-hook button (
) or place the Handset on the cradle,
after you heard the beep tone.
Forwarding screen (during ringing)
Ring tone sounds on both of Handset and transferred terminal telephone.
The screen will change to [Forwarding screen], and then forwarded
2m39s
Code:1001
CS PS READY
Fig.5.1.7
Disconnection screen
When the forwarded distination disconnects the line, the screen will change
to [Disconnection screen], and then Cause Code and total duration is
displayed.
Flow of transferring a call from Handset to one of the terminal telephones
Table 5.1.7.
Object
Forwarding key operation list
Operation
Performance
Forwarding to TEL1
#+1+[On-hook]
TEL1 is called up
Forwarding to TEL2
#+2+[On-hook]
TEL2 is called up
Forwarding to Handset
#+3+[On-hook]
Handset is called up
(Invalid input→
Forwarding mode cancel)
#+4 to 9, or 0
Canceling forwarding
mode
#+*
(Continuing
mode)
#+#
Forwarding
Forwarding mode is cancelled and returned to
[on communication status]
Forwarding mode is cancelled and returned to
[on communication status]
Continuing forwarding mode (beep tone does not
sound), and waiting the input of numeric key of 1 to 3.
49
How to use the telephone/FAX
distination (TEL1 or TE2) is displayed.
Chapter5
Forwarding
TEL1
COMM(SND)