Download Operating Instructions

E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GBSTRDA7100ESUC\050AMP.fm
Menu item
Parameter
H.A.T.S.
ON
(H.A.T.S. (High quality
digital Audio
Transmission System)
function)
Explanation
The digital audio signals input from the i.LINK
component are stored in a buffer temporarily, then
retrieved from the buffer and converted to analog
audio signals at the proper timing. The sound quality
is enhanced because there is no jitter (timing gaps
when reading signals) when transmitting the digital
audio signals. If you do not want to use this function,
select “OFF.”
This function is not activated.
Note
It takes some time to output the sound after a playback
operation is performed on the connected component (ex.,
pressing the PLAY button, pressing the STOP button,
pressing the PAUSE button) due to limitations of the
H.A.T.S. system. The time lag depends on the sound source.
This feature may be ineffective depending on the component
and the sound source, even if you set to ON.
i.LINK VIDEO
ASSIGN ?
(i.LINK video input
assignment)
DIGITAL ASSIGN ?
(Digital audio input
assignment)
You can assign video input to an i.LINK input. i.LINK is selected as
input and the i.LINK component to set up needs to be recognized when
you do this operation (page 58).
Move the control key V/v to select an i.LINK component.
Move the control key B/b to select a number you want to memory ([1][5]), then press the key.
Move the control key B/b to select the video input which is to be
assigned to the i.LINK input, then press the key to enter.
NONE
Video output signal has not sended from this receiver
when the i.LINK input is selected.
VIDEO 1,
VIDEO 2,
VIDEO 3,
DVD,
TV/SAT,
HDMI 1,
HDMI 2
An image of the selected input is on the monitor when
the i.LINK input is selected.
Lets you assign the digital audio input to other input
source. For details, see “Listening to digital sound
from other inputs (DIGITAL ASSIGN)” on page 61.
continued
69GB
STR-DA7100ES
2-320-745-14 (3)
Amplifier Operation
OFF
masterpage: Right