Download User`s Manual

Transcript
Chapter 1 Introduction
●●Rear
5
8
6
7
9
7
10
16
11
12
13
14
5. Handle
6. Security lock slot
7. Speakers
8. USB downstream port
9. Headphone jack
10. Stand*2
11. Main power switch
12. Power connector
13. Input signal connectors
15
This handle is used for transportation.
Complies with Kensington’s MicroSaver security system.
Outputs audio.
Connects to a peripheral USB device.
Connects to headphones.
Adjusts the height and angle (tilt, swivel, and rotation) of the monitor.
Turns the main power on or off.
Connects the power cord.
Left: DVI connector
Middle: HDMI connector
Right: DisplayPort connector
14. USB upstream port
Connects to the USB cable when using software that needs a USB connection, or when using the USB Hub function.
15. Stereo Mini Jack
Connects to a stereo mini jack cable.
16. Cable holder *3
Holds the monitor cables.
*2 An optional arm (or an optional stand) can be attached by removing the stand section (see “6-1. Attaching the Optional Arm” (page 39)).
*3 For the cable holder attachment procedure, see “6-3. Attaching/Detaching the Cable Holder” (page 45).
- 10 -