Download User Manual - Crystal Image Technologies

Transcript
IP Module
Passthrough access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and
access it (assuming it provides terminal support) via Telnet. Select the appropriate
options for the serial port and use the Telnet Console, or a standard Telnet client to
connect to the IP module .
3.6.6 Date And Time
Figure 3-32. Date and Time
This link refers to a page, where the internal real-time clock of the IP module can be set
up (see Figure 3-32). You have the possibility to adjust the clock manually, or to use a
NTP timeserver. Without a timeserver, your time setting will not be persistent, so you
have to adjust it again, after IP module loses power for more than a few minutes. To
avoid this, you can use a NTP timeserver, which sets up the internal clock
automatically to the current UTC time. Because NTP server time is always UTC, there
is a setting that allows you to set up a static offset to get your local time.
Warning
There is currently no way to adjust the daylight saving time automatically. So
you have to set up the UTC offset twice a year properly to the local rules of
your country.
UM-CV-IP-Q411V1
P. 50
www.rackmountsales.com