1
Download 4 - Free
Transcript
GRASSO SYSTEM CONTROL Grasso Refrigeration Division 1.2.3.8 Configuration menu 50 Configuration PLC version: OP version: PLC version OP version Configuration Refrigerant Comp type Vi code << Configuration Display of the PLC program version used. Display of the operater panel version used >> Refrigerant: Compressor type: Vi-code: Select R717, R22, R134a, R404a, R290,R507 or R1270 Select the compressor type C up to XD Select fixed, 51, 52 or 53 >> Select using and or Confirm the selection with Oil filter sensor: Sensor position: Oil filt sensor Sensor position << Configuration >> Select Yes or No Select 395 or 495 (These numbers are position numbers referred to on the P & ID drawing supplied with the compressor unit). Select using and or Confirm the selection with Oil level high: Oil level low: Oil level high Oil level low << Configuration Select “Yes” if sensor mounted, otherwise “No” Select “Yes” if sensor mounted, otherwise “No” >> Select using and or Confirm the selection with Unit type: CH inlet sensor: Unit type CH inlet sensor << Configuration Select Package, FX Chiller or DX Chiller Select “Yes” if sensor mounted, otherwise “No” >> Select using and or . Confirm the selection with Chap. 1 - 14 510116E_chapter1.doc 07.09.2006/ Rev.1
