Download PDF Manual

1
2
3
4
5
6
7
10
9
8
Figure 4
3.2 Assembly Procedure
Align the electric plug of optical main part with the socket of the dimmer, then insert
the plug in the socket.
3.3 Checking after Assembly
Dismantle the dustproof cover on the illumination window. Insert the transformer's
plug in net power socket, turn power switch on. The green light shows the lighting
power is on. Turn the light control knob on the dimmer clockwise and the light beam
is observed from the illumination window. Revolve continuously to increase the
brightness. Project the light spot on a flat surface about 30-40cm distance.
Turn the diaphragm level, the light spot should have 3 kinds of size variety (Figure 5).
Turn the filters level, the light spot should have 3 kinds of colour variety (Figure 6).
Figure 5
Figure 6
Turn the light control knob, the light spot should move up or down.
3