Download User Manuals

Additional information displayed by the meter
The tested facility is live. The measurement is blocked.
Immediately disconnect the meter from the facility
(both conductors)!
Huge noise in the system during the measurement. The
measurement result may be affected by a large, unspecified error.
Measuring range is exceeded.
2.9.2 Low-current measurement of resistance
Turn on the meter.
Turn the rotary switch
to the Rx position.
The meter is ready
for measurement.
RX
N
18
L
Connect test leads according to the drawing.
OPERATING MANUAL MZC-304 version 1.09