1
Download 2707-801, DTAM Programming Software Programming Manual
Transcript
Chapter 14 Entering DTAM Configuration Data SLC Hardware Parameters SLC Com Port Setup Selecting Com Port Setup displays: The Communications Port parameters have the following default values for an SLC: Baud Rate: Parity: Data Bits: 19200 Even 8 Baud Rate Default is 19200 baud. Baud rate options are 38400, 19200, 9600, 4800, 2400, 1200, and 300. Select a baud rate that matches your SLC. Note: The DTAM Plus only supports baud rates 1200 through 19200 when communicating with SLC processors over the DH-485 network. Parity Default is Even parity. Parity options are None, Odd, or Even. Data Bits Defines the word length. Default is eight bits. Data bit options are Seven or Eight bits. 14–12
