Download Unified Synoptic System (USS) User Manual

CHAPTER 5. EXECUTOR
5.3. WINDOW HANDLING
Displays whose measurements are within limits again, are still kept in history. Displays are kept in
the history until display has been selected as explained above. That means no display is automatically
removed from the history. The only way to remove a display from the history is through user interaction.
5.3
Window Handling
5.3.1
Saving Window Layout
5.3.1.1
Prerequisites
• At least one display must be open, otherwise the menu item is disabled.
5.3.1.2
Saving Window Layout
You can save the layout of all displays including size and position so that the window layout can be
restored later.
To save window layout:
1. Choose File > Save Layout As... .
2. In the File chooser dialog, select the folder in which you want to save the layout (e.g. folder layout).
3. In the file name text area enter the name under which you want to save the layout.
4. Click Save.
5.3.1.3
See also
• Loading Window Layout
5.3.2
Loading Window Layout
5.3.2.1
Prerequisites
• Window layout must exist.
5.3.2.2
Loading Window Layout
To load a previously saved window layout:
1. Choose File > Load Layout... .
2. If there are already any displays open you’ll be asked if you wish to close all open displays before
loading a new layout. Select either Yes, No or Cancel. If you chose No a display which is already
open and is also contained in the layout will be opened twice. So if you don’t want any display to
be opened more than once click Yes.
177