Download User`s Manual

Printing
Note
• Text (titles, the company name, the date, etc.) or images can be inserted in the margins at the top and bottom of the
pages and the same information printed on all pages. The information at the top of the page is called the header, the
information at the bottom the footer. For instructions on creating headers and footers, see the separate "Software
Operation Manual".
Basic Printing Operation
Preparation:
Check that the AC power plugs of the captureboard and printer are connected to wall
power outlets. See Page E-13.
Press the ON/Standby
button and switch on the power.
Prepare the printer. (See the previous page.)
Note
• When turning on the power, wait about 5 seconds after connecting the
captureboard's AC power plug to the wall power outlet or after turning off the power (standby mode) before pressing the ON/Standby
button.
• Press the ON/Standby
button to switch on the power. The LED of the
display window will light.
• Turn on the Captureboard power before turning on the printer power.
Press the Feed
want to print.
button and display the sheet surface you
A press of the Feed
button scrolls the sheet surface
one screen portion left and automatically stops it.
Note
• The one-screen that is visible is printable position.
• The image that is projected onto the sheet surface will not be printed.
• Printing of the portion located around the sheet surface might not be
possible. Please see “Effective reading size” on Page E-9.
• When the stop position of the sheet is shifted, after the visible screen
has been scrolled, the screen is further scrolled to the correct stop position and stops automatically.
Notice
• Do not move the sheet manually.
When the stop position of the sheet is offset, the drawing may not print
properly.
• When the stop position of the sheet is shifted, press the Feed
button
and set the proper stop position.
Continued on next page
E-19