1
Download - Reyburn CyberTuner
Transcript
106 106 7. Click the VERIFY button in RCT’s MIDI Control window. You now have a 10 second window of time in which to hold the SAT “SHIFT” button and press “MIDI-OUT” on the SAT. A MIDI verify dialog box will appear when finished, informing you of the results. 7. Click the VERIFY button in RCT’s MIDI Control window. You now have a 10 second window of time in which to hold the SAT “SHIFT” button and press “MIDI-OUT” on the SAT. A MIDI verify dialog box will appear when finished, informing you of the results. SENDING TUNINGS TO THE SAT CAUTION Sending tunings to the SAT will OVERWRITE the tunings in the SAT!!! MAKE SURE you do not send tunings to the SAT unless you are ABSOLUTELY SURE of what you are doing, and have a backup copy of what is in the SAT. Reyburn Piano Service will absolutely not be responsible for lost data under any circumstances (see SOFTWARE LICENSE AGREEMENT). SENDING TUNINGS TO THE SAT CAUTION Sending tunings to the SAT will OVERWRITE the tunings in the SAT!!! MAKE SURE you do not send tunings to the SAT unless you are ABSOLUTELY SURE of what you are doing, and have a backup copy of what is in the SAT. Reyburn Piano Service will absolutely not be responsible for lost data under any circumstances (see SOFTWARE LICENSE AGREEMENT). Sending Tunings To The SAT 1. Make sure your computer and your SAT are off. Sending Tunings To The SAT 1. Make sure your computer and your SAT are off. 2. Make sure the MIDI interface is properly connected to your computer. 2. Make sure the MIDI interface is properly connected to your computer. 3. Using a MIDI cable, connect the SAT’s “MIDI OUT” port to the interface’s “MIDI IN” port. Using the other MIDI cable, connect the SAT’s “MIDI IN” port to the interface’s “MIDI OUT” port. DO NOT FORCE THE CONNECTORS TOGETHER! If they don’t go in easily, check the line-up notch, screw, etc. and try again. 3. Using a MIDI cable, connect the SAT’s “MIDI OUT” port to the interface’s “MIDI IN” port. Using the other MIDI cable, connect the SAT’s “MIDI IN” port to the interface’s “MIDI OUT” port. DO NOT FORCE THE CONNECTORS TOGETHER! If they don’t go in easily, check the line-up notch, screw, etc. and try again. 4. Start up your computer and double click on the Reyburn CyberTuner® icon. Start up the SAT by pressing the SAT “ON” button, and press “TUNE” on the SAT. 4. Start up your computer and double click on the Reyburn CyberTuner® icon. Start up the SAT by pressing the SAT “ON” button, and press “TUNE” on the SAT. 5. Click the SEND button in RCT’s MIDI Control widow. 5. Click the SEND button in RCT’s MIDI Control widow. 6. If you are sure want to OVERWRITE what is in the SAT, first press the “MIDI IN” key on the SAT. 6. If you are sure want to OVERWRITE what is in the SAT, first press the “MIDI IN” key on the SAT. 7. Press “OK to Send” on the computer to initiate sending tunings. Sending will take between 4-32 seconds for 20 to 208 tunings respectively. 7. Press “OK to Send” on the computer to initiate sending tunings. Sending will take between 4-32 seconds for 20 to 208 tunings respectively. 8. A dialog box will recommend that you verify what was just sent; it is recommended that you do this every time you send. 8. A dialog box will recommend that you verify what was just sent; it is recommended that you do this every time you send. The SAT always inserts the tunings it receives through it’s MIDI ports into the lowest memory pages, for example, if your SAT can hold 30 piano tunings and you send 5 tunings to the SAT, these tunings will be stored in pages 1-5 on the SAT. Pages 6-30 are not affected. The SAT always inserts the tunings it receives through it’s MIDI ports into the lowest memory pages, for example, if your SAT can hold 30 piano tunings and you send 5 tunings to the SAT, these tunings will be stored in pages 1-5 on the SAT. Pages 6-30 are not affected. Hint on Sending Tunings To The SAT Any number of tunings can be sent to the SAT from 1 up to the number of pages you have in your SAT. If you send less than the SAT memory limit, such as 1, the SAT will keep waiting for the rest and will not release the keyboard. This does not hurt anything; just press the “ON/OFF” button on the SAT twice to turn it off, and then back on again. Hint on Sending Tunings To The SAT Any number of tunings can be sent to the SAT from 1 up to the number of pages you have in your SAT. If you send less than the SAT memory limit, such as 1, the SAT will keep waiting for the rest and will not release the keyboard. This does not hurt anything; just press the “ON/OFF” button on the SAT twice to turn it off, and then back on again. If you need to change a single high page in memory in the SAT you will have to send the SAT that page with all the pages lower than that page. Its easy to send the SAT one Chameleon tuning for use in page 1. I suggest you use the first several pages as “scrap” pages since they are the most convenient to send to, and use the higher pages for your standard library of tunings. If you need to change a single high page in memory in the SAT you will have to send the SAT that page with all the pages lower than that page. Its easy to send the SAT one Chameleon tuning for use in page 1. I suggest you use the first several pages as “scrap” pages since they are the most convenient to send to, and use the higher pages for your standard library of tunings.
