Download TR3.0 TREADMILL OWNER`S MANUAL

TR3.0 Assembly Instructions
1
Main Base Frame
1. Remove all the parts from the carton and lay the Main Base Frame on a
flat level surface.
2
Uprights & Cables
Hardware Step 2
4
100
99 99
100
55
99
5
100
99
100
99
54
100
99
100
99
99
100
100
2
NOTE: This step may work better with a second person assisting.
1. Connect the Lower Computer Cable (55) from the frame to the Middle
Computer Cable (54) in the Left Upright (4). Tuck the wire connector
back into the frame so that you pinch the wires. Attach the Left Upright
(4) to the frame with four Hex Head Bolts (99) and four Flat Washers
(100). Tighten with the 13mm Wrench (90).
2. Attach the Right Upright (5) to the Frame Base (2) and use a 13mm
wrench (90) to tighten four Hex Head Bolts (99) and four Flat Washers
(100).
TR3.0 Treadmill
6
#99. 5/16” x 1/2”
Hex Head Bolt (8 pcs)
#100. Ø5/16” x 18 x 1.5T
Flat Washer (8 pcs)