Download Operating and Installation Instructions

Operation
Switching on the Hob
Put a pot or pan on the desired heater.
Touch the ON/OFF touch control,
You will see
in each of the heater displays. If the selection of the heater is not
done in 10 seconds the hob will be turned off automatically as a safety measure.
Switching on a Heater
When the hob is on, the power level for a heater can be selected by touching
the [-] [+] touch control. In each increase/ decrease a beep sounds and the corresponding display shows the new power level.
The [-] [+] touch control will be locked:
- If the hob is off, or
- If the Safety Lock is activated (SAFETY LOCK LED on), or
- If there is any heater error or appliance error.
The [+] touch control raises the cooking level to 9
The [-] touch control reduces the cooking level to 0. With the heater at power
level 0, the [-] touch control raises the cooking level to 9
31