Download Operation User Manual
Transcript
3. 22 Drying 건조 [ 추가건조에 따른 습도 설정 도표 ] 온도+상대습도 가열공기온도 상대적인 습도 세척기내의 온도 Drying : The rise of air temperature inside the chamber depends on the moisture content of the load. If the air temperature reaches 80% of the set value it can be assumed that moisture content of the load is already at its minimum. 세척기내의 공기의 온도는 적재물의 습도에 의존하여 증가한다. 만약 공기의 온도가 설정 값의 80% 이르면 적재물의 습도는 최소치에 이른다고 할 수 있다. Extra drying : 추가건조 100% 70% 40% 의 추가건조를 할 수 있다. In addition to the drying phase it is possible to add an extra drying phase which may be necessary depending on the application. The power of air heating can them be selected between 100%, 70% and 40% of the value programmed for drying. (Duration can be programmed from 0.1 to 10 hrs.) Please Note : The load may be very hot immediately after drying; care is required during unloading! A steady discharge of small amounts of moist air from the back of the machine is quite normal (Please do not obstruct it!) 적재물은 건조직후 매우 뜨겁기 때문에 조심스럽게 꺼내야 한다. 필터매트는 한달에 한번 세척을 해준다. 25 uP2-BA00.5096 Si-nAn B/D 1F,SungSan-dong,Mapo-gu,Seoul,Korea. Tel (02) 3141-0889, Fax (02) 3141-8890 ♧E-mail : [email protected] NamA Electronic Industry co., Ltd