Download LCD3210-BK

Transcript
Parts Name and Functions
Control Panel
9
10
OFF
EXIT
7
8
6
5
4
INPUT
MUTE
3
2
MUTE button
Button Location
1
1 POWER button ( )
Switches the power on/off. See page 18.
2
ON
7
DOWN (
) button
Activates the OSM menu when the OSM menu is turned-off.
Acts as
button to move the highlighted area down to select the
adjustment with OSM menu.
AV
Switches the audio mute ON/OFF.
3
8
INPUT button
Acts as SET button within the OSM menu.
Selects which signal connected to the display is shown. (Toggle
switches between [RGB1], [RGB2], [RGB3], [DVD/HD], or
[VIDEO].)
AV [DVD/HD] and [VIDEO] inputs are enabled when the AV-unit
option is installed.
4 PLUS (+) button
Acts as (+) button to increase the adjustment with OSM menu.
AV Increases the audio output level when the OSM menu is turned
off.
EXIT button
Activates the OSM menu when the OSM menu is turned-off.
Acts as EXIT button to move to previous menu in the OSM menu.
9
Remote control sensor and Power indicator
Receives the signal from the remote control (when using the wireless remote control). See page 9.
Glows green when the LCD monitor is in active mode and glows
red when the LCD is in POWER OFF mode. When the LCD is in
power save mode, it will glow both green and red. When SCHEDULE is enabled, it will blink green and glow red. See page 19.
When a component failure is detected within the monitor, it will
blink red.
5 MINUS (-) button
10 Main Power Switch
Acts as (-) button to decrease the adjustment with OSM menu.
Seesaw Switch for the main power on/off.
AV Decreases the audio output level when the OSM menu is turned
off.
Control Key Lock Mode
6
UP (
) button
Activates the OSM menu when the OSM menu is turned-off.
Acts as
button to move the highlighted area up to select the
adjustment with OSM menu.
AV
Denotes an AV unit function.
All AV functions are enabled when the AV unit is installed.
This control completely locks out access to all Control Key functions.
To activate the control key lock function, press both “ “ and
“ “ simultaneously and hold down for three (3) seconds.
To go back to user mode, press both “ “ and “ “ simultaneously and hold for three (3) seconds.
English-6