Download AvMap EKP Setellite Navigation

Fig. 10.4a - Vertical Navigation function
Vertical Navigation can be activated (On) only if a Flight Plan is active (destination present).
Destination point for Vertical Navigation is the last point of the Route or destination of GoTo
mode.
Prior to the Descent Point being reached the Distance To Go displays TO, Time To Go to Descent
point and Descent Rate from the current position. After passing Descent point the system displays
TO, Time To Go to the Destination and Target altitude based on actual descent profile. Time To
Descent or Target ALT values can be displayed in the Data Window of Moving Map and HSI modes.
The Vertical Navigation value displayed in the HSI is calculated as a difference between current
altitude (from GPS) and Target altitude.
10.5WIND CALCULATION
The Wind Calculation feature computes winds aloft by comparing Ground Speed and Track with
indicated heading, indicated air speed and Outside Air Temperature.
> ‘MENU’ 1 sec. + “CALCULATOR” + ‘ENTER’ + “WIND CALCULATION” + ‘ENTER’
User data is entered in the fields at the bottom half of the screen. To set Wind Calculation parameters
use ‘ENTER’ to edit the selected field (a box appears around the active field) and the cursor key to
move between fields. Press ‘CLEAR’ to return to Calculator menu.
Note
This function works best when the airplane is straight and level.
Wind Calculation is a full screen page with the following structure:
59