Download Preface - PinSonne Elektronik

UTD1000L User Manual
Measuring AC Current with UTD1000DL
To measure AC current equal to or lower than
1mA , do the following :
1 . Press I button to set measurement type to AC
Current , the measurement unit is μA . You
can use F3 button to select between μA , mA
and A ranges , the default is μA .
2 . Plug mA current module (UT-M10 ) properly
into input terminals COM and V/Ω , then turn
the switch on the module to uA range .
3 . Insert Black and Red test leads correspondingly
into Black and Red terminals on the module.
4. Connect test leads to tested points, then take the
AC current reading.
Figure 5-17 Measuring AC Current Equal to or
Lower than 1mA
47