Download System configuration


System event selection: 4 selections – Device cold start, Device warm start,
SNMP Authentication Failure, and X-ring topology change. Mark the checkbox to
select the event. When selected events occur, the system will issue the logs.

Device cold start: When the device executes cold start action, the system will
issue a log event.

Device warm start: When the device executes warm start, the system will
issue a log event.

Authentication Failure: When the SNMP authentication fails, the system will
issue a log event.

X-ring topology change: When the X-ring topology has changed, the system
will issue a log event.

Port event selection: Select the per port events and per port SMTP events. It has
3 selections – Link UP, Link Down, and Link UP & Link Down. Disable means no
event is selected.

Link UP: the system will issue a log message when port connection is up only.

Link Down: the system will issue a log message when port connection is down
only.

Link UP & Link Down: the system will issue a log message when port
connection is up and down.
62