Download User`s Manual - MSC Technologies

MSC CX-AD-DPHDMI-R1 User's Manual
2.3.2
Technical Description
DP configuration
In order to configure a certain port to serve as DisplayPort (DP) the following jumper settings are
necessary.
Port
Hot Plug
Priority DVI enable
AUX select
B
J2
J5
J6
J9
J11
C
D
Setting
J12
J19
1-2
J13
J20
2-3
J14
J21
2-3
J17
J24
2-3
J18
J25
2-3
In addition the DP lanes output voltage swing may be adjusted depending on the link quality between DP
connector and DP monitor.
Port
DP voltage swing
1-2
3-4
5-6
B
C
D
J1
J16
J23
Increased
voltage
swing
Nominal
voltage
swing
Deceased
voltage
swing
Fig. 3: Port B configured as DisplayPort using nominal voltage swing.
Fig. 4: Port C and port D configured as DisplayPort using nominal voltage swing.
7