1
Download Software Manual
Transcript
2.3.2.2. Read Single Parameters By using the pop-up menu Read a single parameter can be read from the connected unit. After reading the parameter is automatically marked black. 2.3.2.3. Functions for several parameters simultaneously For simultaneous reading and transmission of several parameters, the features Read All, Transmit All, Transmit Change und Store EEProm can be used. All these functions are activated by the respective buttons in the toolbar. Before executing these functions, a security check must be agreed, because all these features will have a significant impact on the DS2xx and the OS6.0. If the security check is not approved, the corresponding feature cannot be executed. 2.3.2.4. Read All Button Description All parameters of the connected unit will be read and all current parameters overwritten in the parameter list. All parameters will be marked black. Security check: Table 2-3 Read All Os60_Safety_01b_oi_e.doc / 03.08.15 Page 11 / 38
