Download MVI56E-MNETR Set-Up Guide

Procedures
Setup Guide
MVI56E-MNETR ♦ ControlLogix Platform
with Reduced Data Block
5.4.2 Enable the MNET Client 0 Commands
The default module configuration contains two Modbus Client commands. In the
default configuration file, these commands are disabled.
1 To enable the commands, expand the MVI56E-MNETR node in ProSoft
Configuration Builder until the MNET CLIENT 0 COMMANDS tag is visible.
2
Double-click the MNET CLIENT 0 COMMANDS tag to open the EDIT MNET
CLIENT 0 COMMANDS dialog box.
3
Select the first command in the list, and then click EDIT ROW.
Page 52 of 78
ProSoft Technology, Inc.
July 1, 2010