Download SA3C50A - Crowcon Detection Instruments

4. Preparations Before Use
4.3 Attaching Battery Pack
Attaching the battery pack to the main unit
1.
Attach the battery pack so that
the corner of the battery pack
coincides with the ∆ mark on the
main unit.
2.
Tighten the two battery pack
fixing screws at the base of the
battery pack.
Removing the battery pack
1.
Loosen the two battery pack
fixing screws at the base of the
battery pack.
2.
Remove the battery pack by
pulling it sideways to the ∆ mark
on the main unit and then pull it
up.
CAUTION
Two months or more, when you do not use it, please remove a battery
pack from a main unit. If a battery pack is kept while connecting with a
main unit two months or more, there is a case where a battery pack
serves as fault electric discharge, and it becomes impossible to use it.
9