Download DSU III DBU User Manual

Chapter 6. Configuring DTE Options
56 kbps Loop Rate
Secondary Channel
1=SCRAMBLER OFF
2=SCRAMBLER ON
3=DATA INVERT
1=NETWORK OPT.
1=DTE RATE
2=DTE OPTIONS
1=LOCAL
3=CONFIG
2=REMOTE
ENTER ADDRESS
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND
2=CONNECTOR TYPE
3=DATA FORMAT
4=DTE CMD OPTION
5=TRANSMIT CLOCK
6=CS OPTIONS
7=ANTI-STREAM
8=CD OPTIONS
9=TR OPTIONS
A=SR OPTIONS
B=SECONDARY RATE
64 kbps Loop Rate or
56 kbps Loop Rate
No Secondary Channel
1=2.4K
2=4.8K
3=9.6K
4=19.2K
5=38.4K
6=56K/57.6K
7=SAME AS LOOP
1=SCRAMBLER OFF
2=SCRAMBLER ON
3=SUPPRESS LBE
Figure 6-1
Selecting DTE Rates
The AT commands for setting the DTE rate options are shown in
Table 6-A.
40
DSU III DBU User Manual
61200.037L1-1