Download Applause® WT-Amp Plus ST System

I.Introduction
C. Performance Specifications
The Applause WT-Amp Plus ST System synthesizes microgram quantities of ST-cDNA
starting with a total RNA input of at least 50 ng. In approximately seven hours,
the system produces sufficient cDNA for labeling and subsequent hybridization to
GeneChip Gene 1.0 ST and Exon 1.0 ST Arrays. The size of the majority of the cDNA
products produced by the amplification process is between 0.1 and 2.0 kilobases.
D. Quality Control
Each Applause WT-Amp Plus ST System lot is tested to meet specifications of yield
and array performance.
E. Storage and Stability
The Applause WT-Amp Plus ST System is shipped on dry ice and should be unpacked
immediately upon receipt. All components should be stored at –20°C in a freezer without
a defrost cycle.
This product has been tested to perform to specifications after as many as six freeze/
thaw cycles. Kits handled and stored according to the above guidelines will perform to
specifications for at least six months. NuGEN has not yet established long-term storage
stability for the Applause WT-Amp Plus ST System.
F. Material Safety Data Sheet (MSDS)
An MSDS for this product is available on the NuGEN website at
http://www.nugeninc.com/nugen/index.cfm/support/user-guides/.
3
Applause WT-Amp Plus ST System