Download User Manual

8. Technical Specifications
2. Safety Instructions
l
36PCS 10W Edison RGBW Quad high power LEDs
l
50,000 hours lifespan and low power consumption
l
8 bit smooth and 16 Bit precise resolution for PAN/TILT movement
l
540°/630° pan and 265° tilt movement
This device has left the factory in perfect condition. In order to maintain this condition
l
Scan position memory, auto reposition after unexpected movement
and to ensure a safe operation, it is absolutely necessary for the user to follow the
l
RGBW color mixing system
safety instructions and warning notes written in this user manual.
l
LED shutter
l
LED dimming
l
LED rainbow effect
If the device has been exposed to temperature changes due to environmental
l
Macros effect
changes, do not switch it on immediately. The arising condensation could damage
l
Strobe effect with 18 flashes per second and pulse effect
the device. Leave the device switched off until it has reached room temperature.
l
General dimming and blackout for all four colors
This device falls under protection-class I. Therefore it is essential that the device be
l
14 DMX channels
earthed.
l
DIM4 technology( 4096 step linearity dimmer)
The electric connection must carry out by qualified person.
l
DMX512, master-slave and sound activated controllable or auto operation
The device shall only be used with rate voltage and frequency.
l
Blue background LCD display
Make sure that the available voltage is not higher than stated at the end of this manual.
l
Input Voltage: AC110-240V 50-60Hz
Make sure the power cord is never crimped or damaged by sharp edges. If this would
l
LED Quantities: 36pcs 10W 4 in 1 RGBW LEDs
be the case, replacement of the cable must be done by an authorized dealer.
l
Control Signal: DMX512, master-slave and sound activated or auto operation
Always disconnect from the mains, when the device is not in use or before cleaning it.
l
Control Channel: 14 DMX Channels
Only handle the power cord by the plug. Never pull out the plug by tugging the power
l
Power Consumption: 360W/ 380W(max)
cord.
l
Dimensions: 350x260x350mm
During initial start-up some smoke or smell may arise. This is a normal process and
l
Packing Dimensions: 395x320x460mm
does not necessarily mean that the device is defective, it should decrease gradually.
l
Net Weight: 9kgs
Please don't project the beam onto combustible substances.
l
Gross Weight: 11kgs
Fixtures cannot be installed on combustible substances, keep more than 50cm
distance with wall for smooth air flow, so there should be no shelter for fans and
ventilation for heat radiation.
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazer