Download VMware ACE Administrator`s Manual

VMware ACE Administrator’s Manual
master (or it can get one automatically from a DHCP server), select Use bridged networking. This setting is most likely to be appropriate if the package is to be installed on a computer connected to an office network.
If the package is to be installed where no separate IP address is available for the ACE instance but the ACE instance must be able to connect to the Internet, select Use network address translation (NAT). NAT also allows the user to share files between the ACE instance and the host operating system. For more details about networking options, see the Workstation User’s Manual.
Click Next to continue.
If you selected Typical as your configuration path, skip to Step 14.
If you selected Custom as your configuration path, continue with the steps below to configure a disk for the ACE master. 10
Select the type of SCSI adapter you want to use with the ACE master.
An IDE adapter and a SCSI adapter are installed in the ACE master. You do not need to make any configuration choices for the IDE adapter. You can choose a BusLogic or an LSI Logic SCSI adapter. The default for your guest operating system is already selected. All guests except Windows Server 2003, Red Hat Enterprise Linux 3 and NetWare default to the BusLogic adapter.
The LSI Logic adapter has improved performance and works better with generic SCSI devices. The choice of which SCSI adapter to use is separate from the choice to make the virtual disk an IDE or SCSI disk. Older guest operating systems do not include a driver for the LSI Logic adapter. If you choose to use the LSI Logic adapter in an operating system that does not have a driver for it, you must download the driver from the LSI Logic Web site. See the VMware Guest Operating System Installation Guide for details about the driver and the guest operating system you plan to install in this ACE master.
Click Next to continue.
96
VMware, Inc.