Download Your set-top box

Installation
❖ Connection method 1: To TV and VCR
If you have a VCR with a SCART connector and a TV with a SCART connector, you
can connect up as shown in the diagram below.
Lead from your
TV antenna
Supplied RF lead
TV
VCR
IN
ANTENNA IN
IN
SCART lead
(not supplied)
Supplied
SCART lead
AUDIO
TV OUT
ANTENNA
IN
CAUTION
When servicing use only identical replacement parts
CAUTION
SAT IN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AC 230V
13/18V DC
350mA max.
S/PDIF
ANT IN
TO TV
INC. MODULATOR
TV SCART
VCR SCART
50Hz
Supplied by Strong & Co. Japan
Lead from your
satellite dish
1.
Use the supplied SCART lead to connect your set-top box to your TV.
2.
Use a SCART lead (not supplied) to connect your set-top box to your VCR.
3.
Connect the lead from your satellite dish to the satellite input connector
(marked SAT IN) on your set-top box.
The RF connection is not required for digital satellite TV. However, you may wish to
connect RF leads as shown, to continue to view or record terrestrial TV from your TV
antenna.
You must then connect the lead from your TV antenna to the antenna input
connector on your VCR.
www.strongsat.com