Download - Power Logic

SFT2841 Setting &
Operating Software
Configuring a Sepam™ Network
Use and Commissioning
Connection Window
The SFT2841 software connection window is used to:
b select an existing Sepam™ network or configure a new one
b set up the connection to the selected Sepam™ network
b select one Sepam™ unit from the network and access its parameters,
settings, and operation and maintenance information.
Configuring a Sepam™ Network
Several configurations can be defined for the various Sepam™ installations.
A Sepam™ network configuration is identified by a name. It is saved on the SFT2841
PC in a file in the SFT2841 installation directory (default: C:\Program
Files\Schneider\SFT2841\Net).
Configurnig a Sepam™ network is in two parts:
b Configuring the communication network
b Configuring the Sepam™ units.
Configuring the Communication Network
PE50603
To configure the communication network, first define:
b The type of link between the PC and the Sepam™ network
b The communication parameters, according to the type of link selected:
v direct serial link
v link via Ethernet TCP/IP
v link via telephone modem.
7
Configuration windows for the communication network, according to the type of link: serial link,
modem link (STN) or Ethernet link (TCP)
© 2007 Schneider Electric. All Rights Reserved.
63230-216-219-B1
219