Download Ferm Table drilling machine FTB

SPARE PARTS LIST
REF NR
27
37
50
51
56
58
10
-
DESCRIPTION
MOTOR
MAGNETIC SWITCH
COVER FOR SPRING
SPRING
CHUCK GUARD
V-BELT
CHUCK
CHUCK KEY
CONDENSER
FERM NR
311053
311051
311059
311058
311055
800157
311054
311057
311056
TABLE DRILLING MACHINE
TECHNICAL SPECIFICATIONS
Voltage
Frequency
Power input
No load speed
Number of speeds
Chuck capacity/Morse Conical
Weight
Lpa (sound pressure level)
Lwa (sound power level)
Vibration value
|
|
|
|
|
|
|
|
|
|
230 V
50 Hz
500 W
390-2340/min
9
16 mm/ B-16
21 kg
62 dB(A)
75 dB(A)
1.56 m/s2
PRODUCT INFORMATION
Fig.A
1. On/off switch
2. Drill dept gauge
3. Protection guard
4. Motor
5. Drill dept lever
6. Table adjustment
Check first whether or not the delivery has been damaged by transport and/or whether all the parts are present.
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual with the machine.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product
and save these instructions.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work environment
Do not expose power tools to rain. Do not use
power tools in wet or damp locations. Keep work
area well lit. Do not use power tools in the presence
of flammable liquids or gases.
10
Ferm
Ferm
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges, refrigerators).
4. Keep children and pets away
Do not let children or pets come in contact with the
tool or the extension cable. All children and pets
should be kept away from work area.
5. Storing tools
When not is use, tools should be stored in dry, high,
or locked location out of reach of children.
6. Do not force the tool
It will work better and safer at the rate for which it
was intended.
7. Use right tool
Do not force small tools or attachment to do the job
of a heavy duty tool. Do not use tools for purposes
for which they are not intended: for example, do not
use a circular saw for cutting trees or logs.
8. Dress properly
Do not wear loose clothing or jewellery. It can get
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors. Wear protective hair covering to contain long
hair.
9. Use safety glasses
Also use safety goggles. A dust mask should be worn if
cutting or drilling operation is dusty, in particular
chipboard and MDF.
10.Do not abuse cable
Never carry tool by the cable or pull it to disconnect
it from the power socket. Keep cable away from
heat, oil and sharp edges.
11.Secure work
Use clamps or a vice to hold work. It is safer than
using your hand and it frees both hands to operate
tool.
12.Do not over-reach
Keep a proper footing and balance at all times.
13.Maintain tools with care
Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and
changing accessories. Inspect tool cable periodically
and, if damaged, have repaired by an authorised service facility or electrician. Inspect extension cable
periodically and replace if damaged. Keep handles
dry, clean and free from oil and grease.
14.Disconnect tools from the power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters. Always
disconnect the appliance from the power supply.
15.Remove adjusting keys and wrenches
Ensure that keys and adjusting wrenches are removed from the tool before switching on.
16.Avoid unintentional starting
Do not carry plugged-in tools with finger on the
switch. Ensure that switch is off before being plugged
in.
17.Outdoor use extension cables
When tool is used outdoors, use only extension
cable intended for use outdoors and marked accordingly. Do not use in the rain.
18.Stay Alert
Watch what you are doing. Use common sense. Do
not operate tools when you are tired.
3