Download User manual
Transcript
5.3.2.1 Messages There are two types of messages: Warnings/information, which allow the system to be operated further, and faults, which switch off the boiler. In order to start the boiler again, the fault must be eliminated and reset. 1 red text Unacknowledged fault 2 white text Unacknowledged warning/information 3 grey text Acknowledged message (information/warning/fault) 4 Message number Values of 1000 or higher are information/warning messages. If the message number is below 1000, it is a fault. 5 Date & time Time of occurrence Pressing the message opens the acknowledge dialogue. 5.3.2.2 Maintenance Ash emptied Resets the ash filling level after the ash container has been emptied out. Start filling Starts the daily bin filling cycle. Start component test Runs the automatic unit test 5.3.2.3 System info Displays important boiler information, including the type designation, serial number and various version numbers. 5.3.2.4 Hours of operation 1 Performance Lists the hours of operation in the various power ranges and the grand total (at the bottom). 2 Components Displays the hours of operation of each unit including the number of starts (right). 21