Download NPC30A - AVSL Group

RELAY PANEL CONNECTIONS
J connects to J on main board (already connected)
K connects to K on main board (already connected)
P2 connects to P2 on main board (already connected)
P3 connects to P3 on main board (already connected)
2CN1 30 AMP CONNECTOR
L
= 24Vac supply input LIVE
N
= 240Vac supply input NEUTRAL
E
= input EARTH
Note: It is recommended that the supply to CN1 is taken from
a separate 30 amp ELCB/RCCD in the on site consumer unit.
2CN2 30 AMP OUTPUR CONNECTOR
L
= 240Vac controlled output LIVE
N
= 240Vac controlled output NEUTRAL
E
= output EARTH
2CN3: Live, neutral and earth connections to TX1 primary
(already connected).
TRAFFIC LIGHT REMOTE DISPLAY (952.804UK)
A, B, C, D connect to corresponding connectors on main panel
(240Vac mains powered displays should be supplied via 5 amp
switched spur or similar to Euro connector, low voltage
connections, A, B, C, D still connect to A, B, C, D respectively
on main panel).
Errors and omissions excepted.
Copyright© 2015. AVSL Group Ltd.
952.801UK User Manual