Download LTI TruPulse 360 / 360B User`s Manual

Section 3 - Basic Operations
Page 17
Restore Default Settings
It is possible to restore the TruPulse 360's default settings. Restoring the default settings will affect
some of the system setup options.
The table below lists the parameters and the associated default settings. The third column lists the
page reference for additional information.
Parameter
Measurement Mode
Distance Units
Inclination Units
Bluetooth
Declination
Refer to Page
Number
33
19
19
20
25
Default Value
HD
Yards
Degrees
oFF
0.00
Restoring default settings:
•
Does not effect Tilt Sensor calibration or Horizontal Angle Compass Calibration.
•
Does cancel/clear serial command to Bluetooth ALL ON.
To restore the default settings:
1.
Simultaneously press-and-hold the
approximately 5 seconds.
,
, and
buttons for