Download Untitled

Transcript
Description of Function Codes
MD280 User Manual
details, see the output terminal functions described in group F3.
When F0-01 is set to 4 (Multi-reference), set F8-00 and F8-08 to determine the required
speeds.
Function Code
Parameter Name
Setting Range
Default
0: Set by F8-01
1: AI1
Reference 0 setting
source
F8-00
2: AI2
0
3: Pulse setting
4: PID
5: Preset frequency (F0-03) with
UP/DOWN modification
It is used to set the setting source of reference 0.
Note that when F8-00 is set to 4, F6-00 (PID setting source) cannot be set to 4 (Multireference).
Function Code
Parameter Name
Setting Range
Default
F8-01
Reference 0
-100.0%–100.0%
0.0%
F8-02
Reference 1
-100.0%–100.0%
0.0%
F8-03
Reference 2
-100.0%–100.0%
0.0%
F8-04
Reference 3
-100.0%–100.0%
0.0%
F8-05
Reference 4
-100.0%–100.0%
0.0%
F8-06
Reference 5
-100.0%–100.0%
0.0%
F8-07
Reference 6
-100.0%–100.0%
0.0%
F8-08
Reference 7
-100.0%–100.0%
0.0%
When F0-01 is set to 5 (PLC), you need to set the PLC running parameters F8-00 to F8-27.
The negative/positive mark of values of F8-00 to F8-08 determines the simple PLC running
direction: The positive mark indicates the forward direction, and the negative mark indicates
the reverse direction.
Figure 6-23 Simple PLC running
Simple PLC running
Acceleration
/Deceleration
time defined in
F8-13
F8-07
F8-03
F8-08
F8-01
Acceleration
/Deceleration
time defined in
F8-15
F8-02
F8-12
F8-14
Acceleration
/Deceleration
time defined in
F8-17
DO, relay
- 142 -
250 ms
pulse signal