Download User Manual

PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
www.moosesound.com
TL260Z
Multi-zone PA mixer/amplifier
6 independent zones
TL260Z
MULTI-ZONE PUBLIC ADDRESS AMPLIFIER
ZONE
1
2
3
4
5
6
VOLUME
EQUALIZER
MIC
1
MIC/LINE
2
3
TREBLE
BASS
MASTER VOLUME
4
DING
DONG
OUPUT LEVEL
POWER ON
VOLUME
0
10
-13
-8
-3
0dB
CLIP
USER’S MANUAL
MAN196_0
TL260Z
Multi-zone PA mixer/amplifier
Introduction
Dear customer,
Thank for choosing MOOSE branded products!
MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.
In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.
Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.
Caution
1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match
the values specified on the equipment.
2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.
3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.
4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.
5. Do not open or modify this equipment.
6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
7. Do not turn on the Amplifier ON before checking that all volumes to zero .
IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user
serviceable parts inside. Have repairs carried out only by qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock.
The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
The amplifier is marked with this instruction so please
proceed accordingly in order to avoid any hazard.
To prevent electrical shock do not remove
the cover. No user serviceable parts inside.
Refer service to qualified personnel only.
www.moosesound.com
MAN196_0
2
TL260Z
Multi-zone PA mixer/amplifier
Manufacturers Declaration
PROPER DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .
ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION
Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.
EC DECLARATION OF CONFORMITY
The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to [email protected].
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
www.moosesound.com
MAN196_0
3
TL260Z
Multi-zone PA mixer/amplifier
Connections and Controls
Please refer to the following scheme and instructions:
11
TL260Z
MULTI-ZONE PUBLIC ADDRESS AMPLIFIER
ZONE
1
2
3
4
5
6
VOLUME
EQUALIZER
MIC
MIC/LINE
1
2
BASS
TREBLE
3
MASTER VOLUME
4
DING
DONG
OUPUT LEVEL
POWER ON
VOLUME
0
10
-13
9
3
2
5
4
6
-8
8
7
-3
0dB
CLIP
10
1
24
OUTPUT
Z6
Z5
Z4
Z3
Z2
Z1
17
20
LINE
SLAVE
INPUT
COM
0-100V
4/16
MIC
PRIORITY MIC
1
2
3
4
FUSE F 10A
PHANTOM
LINE
3
1
5
2
4
MIC
LINE
ON
MIC
OFF
REC
MIC INPUT
DING DONG
MAINS
230V AC
50HZ / 450VA
CAUTION
WARNING
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
To prevent electrical shock do not remove
the cover. No user serviceable parts inside.
Refer service to qualified personnel only.
Do not touch output terminals during
operation. High voltage may be present!
25
(OPTIONAL)
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
23
12
13
14
15
16
18
19
21
22
1. POWER ON: Illuminated on/off switch. Before switching the system on, always adjust the volume to zero.
2. VOLUME 1: Channel 1 Volume Control.
3. VOLUME 2: Channel 2 Volume Control.
4. VOLUME 3: Channel 3 Volume Control.
5. VOLUME 4: Channel 4 Volume Control.
6. TREBLE: Master tone equalizer control - Treble.
7. BASS: Master tone equalizer control - Bass.
8. MASTER: Master Volume Control; Main volume adjustment. Sets the relative level of input signal.
9. DING DONG: This Trimmer allows you control Ding Dong´s volume.
10. VUIMETER: Those LED indicate output signal level;
11. ZONES: These push buttons allows connect and disconnect all 6 independent zones;
12. MIC1: Channel 1 microphone input socket - Jack ¼’’.
13. MIC2: Channel 2 microphone input socket - Jack ¼’’.
14. MIC3: Channel 3 microphone input socket - Jack ¼’’.
www.moosesound.com
MAN196_0
4
TL260Z
Multi-zone PA mixer/amplifier
Connections and Controls
15. MIC4: Channel 4 microphone input socket - Jack ¼’’.
16. MIC3 / LINE3: This switch allows you to choose between MIC3 or LINE3 Input. You can adjust Volume with
VOLUME3 Pot ( 4 ).
17. LINE 3: Signal Input to connect a CD Player or an AM/FM Transmitter ( Radio ).
18. LINE 4: Signal Input to connect a CD Player or an AM/FM Transmitter ( Radio ).
19. MIC4 / LINE4: This switch allows you to choose between MIC4 or LINE4 Input. You can adjust volume through
front panel volume pot ( 5 ).
20. SLAVE: Signal output in RCA for connection of another device such as an amplifier.
21. REC: Signal output in RCA for connections of a recorder device.
22. PHANTOM: This switch allows you to connect/disconnect Phantom Power supply.
23. PRIORITY MIC: Input Socket for connection of a Priority Mic.
24. OUTPUT: 100V Line transformer and 4-16Ohm terminal outputs for Speakers - respect polarity and please
refer to the connection diagram presented on this manuel to ensure that all connections are made correctly.
25. MAINS IN: Power socket with fuse holder, AC 230V - 50~60Hz. Replace the fuse only with a fuse of the same
type and rating. If the fuse blows repeatedly, please contact an authorised service company.
Connecting procedures
In order to ensure the right procedure, please folow as described:
1 - Verify that all Volume Control Pots ( 2 - 8 ) are at their minimum value ( 0 );
2 - Connect the Mains Supply Cable ( 25 );
3 - Connect all signal sources and devices that will be working with TL260Z to their respective Inputs just like
connection diagram below;
4 - Connect the Speakers. If you have Low Impedance Speakers then you must connect them to Terminals ( 9 ).
The speakers to be used in the installation must have 100V Line Transformer, always respecting polarity;
5 - Connect the Amplifier applying on the On/Off Power Switch ( 1 );
6 - Adjust Volumes;
Your Amplifier is ready to start working. If something wrong occurs you must turn off the Amplifier and verify all
connections and steps again.
www.moosesound.com
MAN196_0
5
TL260Z
Multi-zone PA mixer/amplifier
Connection diagram
OUTPUT
Z6
Z5
Z4
Z3
Z2
Z1
INPUT
COM
4/16
0-100V
LINE
MIC
PRIORITY MIC
1
2
3
SLAVE
4
FUSE F 10A
PHANTOM
LINE
3
1
5
2
4
MIC
LINE
ON
MIC
OFF
REC
MIC INPUT
DING DONG
MAINS
230V AC
50HZ / 450VA
(OPTIONAL)
CAUTION
WARNING
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
To preve nt ele ctrical shock d o not remove
th e cover. No user serviceable parts inside.
Refer service to qualified personnel only.
Do not touch output terminals during
operation. High voltage may be present!
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
AMPLIFIER
MIC1
PRIORITY
MIC
MIC2
RECORDER
MIC 3
MIC 4
LINE 3
CD
LINE 4
CD
WITHOUT ZONES:
OUTPUT
Z6
Z5
Z4
Z3
Z2
Z1
OUTPUT
COM
0-100V
4/16
Z6
Z5
Z4
Z3
Z2
Z1
COM
4/16
0-100V
100V
4-16ohm
YOU GET MAXIMUM OUTPUT POWER WITH 4Ohm
S SPEAKER´S POWER = AMPLIFIER RATED POWER
INDEPENDENT ZONES connection ( 100V ):
OUTPUT
Z6
Z5
Z4
Z3
Z2
Z1
COM
4/16
0-100V
Z1
Z4
Z2
IN ORDER TO HAVE THE TL260Z WORKING WITH DIFFERENT ZONES YOU JUST HAVE TO CONNECT
COMMON terminal marked with “COM” AND THE RESPECTIVE ZONE TERMINAL TO THE SPEAKER ( + )
www.moosesound.com
MAN196_0
6
TL260Z
Multi-zone PA mixer/amplifier
Technical specifications
MODEL
TL260Z
TYPE
Public address mixer-amplifier
POWER OUTPUT (RMS)
260W
FREQUENCY RANGE
50Hz - 15kHz
T.H.D. (20Hz - 20kHz)
< 1% @ 1kHz
S/N RATIO
> 90dB @ 1kHz
ZONES
6 zones
CONTROLS
Bass, Treble and Master, Volume for MIC/LINE in
INDICATORS
Power on, Signal and Clip, Active zone
INPUTS
Microphone and Line in
OUTPUTS
Low impedance 4-16Ohm, High impedance 100V
CONNECTORS
Input in 6.3mm Jack, RCA line, output: touch-proof binding post
PHANTOM POWER
+48V DC
OTHER FEATURES
Independent zone control, Ding-dong, MIC/LINE switch
PROTECTIONS
Short circuit, DC protection
OPERATING VOLTAGE
230V AC (factory config.), 50~60Hz
POWER CONSUMPTION
260VA
COOLING
Continuously speed fan, 120mm / 230V AC
DIMENSIONS (WxDxH)
3RU space, 420mm depth
WEIGHT
16Kg
Dimensions
TL260Z
MULTI-ZONE PUBLIC ADDRESS AMPLIFIER
OUTPUT
ZONE
1
2
3
4
5
INPUT
6
Z6
Z5
Z4
Z3
Z2
Z1
COM
0-100V
4/16
132
MIC/LINE
2
3
TREBLE
2
3
SLAVE
4
BASS
PHANTOM
MASTER VOLUME
LINE
MIC
LINE
ON
MIC
OFF
4
3
1
5
DING
DONG
OUPUT LEVEL
POWER ON
CAUTION
10
-13
-8
-3
0dB
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CLIP
MAINS
230V AC
50HZ / 450VA
484
2
4
REC
MIC INPUT
DING DONG
VOLUME
0
1
FUSE F 10A
EQUALIZER
MIC
1
LINE
MIC
PRIORITY MIC
VOLUME
To pre ve nt ele ctri cal sh ock d o not rem ove
th e cove r. No user servi ceable p arts insid e.
Refe r service to quali fied personnel only.
WARNING
(OPTIONAL)
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
Do not touch output terminals during
operation. High voltage may be present!
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
430
Unit: mm (milimeters)
www.moosesound.com
MAN196_0
7
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
MOOSE is a brand or PROFACTOR S.A.
PROFACTOR S.A
Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: +351 224 119 160
Fax: +351 224 155 822
[email protected]
www.moosesound.com