Download SCXI-1200 User Manual - Artisan Technology Group

Index
Numbers
analog input configuration, 2-6 to 2-9. See also
analog input signal connections.
bit configurations (table), 2-5
DIFF input
definition (table), 2-7
description, 2-8
factory configuration, 2-5
NRSE input
definition (table), 2-7
description, 2-8
polarity and range, 2-9
RSE input
definition (table), 2-7
description, 2-8
analog input multiplexers, 4-3
analog input signal connections, 3-4 to 3-6
common-mode signal rejection
considerations, 3-13
DIFF configuration, 3-7 to 3-8
definition, 3-7
floating signal sources, 3-9 to 3-10
grounded signal sources, 3-8 to 3-9
when to use, 3-7
single-ended signal connections
definition, 3-10
floating signal sources (RSE configuration),
3-11
grounded signal sources (NRSE
configuration), 3-11 to 3-12
when to use, 3-10
analog input specifications, A-1 to A-6
amplifier characteristics, A-3
dynamic characteristics, A-4
explanation, A-4 to A-6
DAQ rates, A-6
differential nonlinearity, A-5
+5 V signal, 3-4
A
ACH<0..7> signal
description (table), 3-3
input ranges and maximum ratings, 3-4
ACK* signal
description (table), 3-18
mode 1 output timing (figure), 3-20
mode 2 bidirectional timing (figure), 3-21
A/D FIFO, 4-4
ADC (analog to digital converter), 4-4
AGND signal, 3-3
AISENSE/AIGND signal
analog input signal connections, 3-4
description (table), 3-3
NRSE configuration (table), 2-7
amplifier characteristics, A-3
analog input and DAQ circuitry, 4-2 to 4-8
bipolar analog input signal range versus
gain (table), 4-7 to 4-8
block diagram, 4-3
DAQ rates, 4-6 to 4-8
DAQ timing circuitry, 4-4 to 4-8
description, 4-3 to 4-4
maximum recommended data acquisition
rates (table), 4-7
multiple-channel (scanned) data acquisition,
4-5 to 4-6
overview, 4-2 to 4-3
settling time versus gain (table), 4-7
single-channel data acquisition, 4-5
unipolar analog input signal range versus
gain (table), 4-8
© National Instruments Corporation
I-1
SCXI-1200 User Manual